Commercial Vehicle Product Datasheet FlexModTM SMART BATTERY ISOLATOR CONTROLLER THE FlexModTM FAMILY OF PRODUCTS COMMON FlexModTM APPLICATIONS
Preserves starting battery voltage by isolating the auxiliary battery when system voltage drops. For vehicles with two batteries (or banks of batteries). Turns any electromechanical solenoid or relay into a Smart Isolator.
Features and Benefits:
● Isolates main and auxiliary batteries when system voltage drops below 12.7V, and automatically reconnects battery banks at 13.2V. Preserves starting power; eliminates downtime and jump starts due to dead batteries.
● Start assist feature provides boost to starting battery, when needed.
● Compatible with modern electronically controlled alternators (some diode Battery Isolators are not). Smart Battery Isolator Controller eliminates false battery warnings created by diode isolators.
● Status light output drives remote light, informing operator when banks are connected.
● Auto-ranging to automatically sense the voltage of the system (12 or 24V) and selects the presets appropriate to that voltage.
● Waterproof, dustproof and vibration-proof. Sealed to IP67 so it can mount on a vehicle even in places where roadsplash is a problem.
● Ultra low 1mA standby current means minimal battery drain – especially valuable when vehicle is in storage or not in use.
● Factory programmable unit is highly versatile: with a broad range of presets available to match any special application.
● Rated for more than 1,000,000 on-off cycles – unit operates for the lifetime of the vehicle. Solid state technology gives long life and low maintenance.
● Compact design (4 x 3 x 1”) – Uses less space; mounts outside or inside. Saves money by eliminating other hardware, and provides better wire routing.
48540 、 48540-BX 、 48540-01-BX 、 48740 、 48740-01-BX 、 12805 |
|
[ Idle reduction for work vehicles ][ NFPA 1901 Load Manager compliance for fire vehicles ][ Combined timer/voltage shutoff for police vehicles ][ Smart charging system for boats ] |
|
Application note & Design Guide |
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
2017/07/27 |
|
Rev: 053117 |
|
|
|
786 KB |
- +1 Like
- Add to Favorites
Recommend
- Very Fast Acting Fuse PICO® II Fuse Series, Designed for Battery Management System | Littelfuse
- New Littelfuse 400PV Photovoltaic Fuses Provide Rugged Circuit Protection for Next-Gen Integrated Solar Shingles
- Littelfuse Launches 1500 Volt Solar String Fuse and Holder Rated 35 to 60 Amperage
- Littelfuse Completes Acquisition of C&K Switches
- Littelfuse expands its fuse manufacturing operation in China, Cuting Customer Order Fulfillment Lead Time by Half
- Littelfuse Launches Microsite to Protect Electrical Systems, Motors, and Pumps in Mining Applications
- Littelfuse EV1K Series Fuse First to Provide 1000Vdc Automotive Grade Protection for Next-Gen Passenger Cars and Commercial EVs
- Littelfuse IX4351NE SiC MOSFET & IGBT Driver Wins Annual Power Product Award
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.