JUMO BlackLine CR 4P Conductive four-electrode conductivity sensor
The JUMO BlackLine CR 4P acquires the electrolytic conductivity of a measuring liquid according to the conductive four-eiectrode measuring principle. When combined with a suitable transmitter, precise measurements over a broad measuring range from 1 uS/cm to 300 mS/cm are ensured. A temperature probe which is integrated into the sensor (either Pt100 or Pt1000) simultaneously acquires the temperature of the measuring liquid.
Compared to 2-electrode sensors, this sensor offers a multitude of application-based advantages in the field and in the lab, and can be used both for measuring purified water and for determining ion concentrations in salty, acidic and alkaline media.
The sensor shaft is made from robust PPE, and a high-quality, abrasion-resistant special graphite is used for the electrode material. All of the materials used are physiologically safe.
The tried-and-tested design, with a 120-mm insertion length, 12-mm shaft diameter and the standardized Pg 13.5 process connection, enables easy installation in commercially available fittings, and means that this conductivity sensor can be used, for example, with conventional pH and redox electrodes in corresponding combination fittings.
The sensor is also particularly suited for connection to hand-held and laboratory measuring devices.
●Special features:
■Wide measuring range (1 uS/cm to 300 mS/cm)
■Suitable for both low and high conductivity
■Reliable and precise measurements
■Reduced sensitivity to pollutants
■No measurement uncertainty resulting from polarization effects
■For universal use
|
JUMO BlackLine CR 4P 、 202931 、 202931/10... 、 JUMO dTRANS CR 02 、 JUMO AQUIS 500 CR 、 JUMO AQUIS touch P/S 、 JUMO digiLine CR 、 202931/10-1003-84-71-5000-120 |
|
|
[ eneral water technology ][ Environmental technology ][ Industrial process water ][ Horticultural technology ][ Fish breeding, aquaristics ][ aquaponics ][ Salt concentration measurement ][ Laboratory use ] |
|
|
Datasheet |
|
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
|
2020-07-15 |
|
|
V2.00 |
|
|
00738467 |
|
|
283 KB |
- +1 Like
- Add to Favorites
Recommend
- The Difference between LiMnO2 Button Battery CR Series and CR/PH Series
- Omnergy brand CR Series Button Batteries Have Low Self-discharge Characteristics and Can Be Stored for A Long Time to Reduce Power Loss
- Kinghelm‘s Pluggable Terminal Block KH-F600V-4P-7.62G Provided the Pitch of 7.62mm and Total PINs of 4P
- Standex-meder Instrumentation Grade Relays Offer Unparalleled Switching Technology Well Suited for Instrumentation Applications
- LiMnO2 Lithium Batteries Powers the CGM Dynamic Blood Glucose meter
- Maxell Develops Cylindrical Type Lithium Manganese Dioxide Battery With Industry‘s Highest Capacity Suitable for IoT Devices
- Lijia CR123A Lithium Manganese Cylindrical Batteries with the Single Battery Rated Voltage of 3V
- Chinese top 3 OEM manufacturer of lithium coin cells/button batteries Power Glory participated in the 24th Enlit Europe 2023
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
