JUMO digiLine CR head transmitter: Intelligent electronic components for conductive conductivity sensors for automation systems with JUMO digiLine, IOLink, analog or binary signals Data Sheet
The JUMO digiLine CR allows sensors for electrolytic conductivity to be connected to a measuring and/or automation device. The JUMO digiLine CR is available with 4 different interface types for transferring measured values or switching signals, depending on the requirement:
■ RS485 interface for the JUMO digiLine protocol and Modbus
■ IO-Link interface for connecting to modern automation systems
■ Analog outputs for transfer of the measured values as a standard signal of 4 to 20 mA
■ Binary outputs for switching applications (e.g. controlling relays) The versions with RS485 interface are used in JUMO digiLine operation with Plug & Play support on the JUMO AQUIS touch S/P or in Modus operation on the JUMO mTRON T. Several sensors continuously transmit their measurement data over the bus to a master. The variant with IO-Link interface is an important supplement via which JUMO meets its customers' requirements in the modern world of automation technology. Alternatively, device versions with analog and binary outputs are available. The analog version is fitted with 2 analog outputs and transfers temperature and conductivity measured values as a scaleable standard signal (4 to 20 mA). The version with binary outputs has 2 semi-conductor relay outputs (PhotoMOS®) for realizing switching applications. The device versions with analog and binary outputs also have 2 binary inputs. Via the binary inputs, the hold functions or measuring range selection can be actuated in the JUMO digiLine CR using potential-free contacts or logic signals.
●Mounting and connection:
When equipped with a head transmitter, conductivity sensors and JUMO digiLine electronics are one integrated module, which is installed completely at the operating location in a suitable fitting. The electrical connection is made simply and quickly with pre-assembled cables via a M12 plug connector or M12 socket, depending on interface type.
●Configuration, parameterization and calibration:
The JUMO digiLine CR is configured, parameterized and calibrated on the JUMO AQUIS touch S/P. In the JUMO digiLine CR device versions with display and operating panel, operation is also possible on the JUMO digiLine CR itself. The calibration, however, also be conveniently carried out in the laboratory on a PC using the JUMO DSM-Software (Digital Sensor Management software). For the connection to the PC, the JUMO digiLine CR has a Micro-B USB connection type.
●Special features:
■ Reliable transmission of measured values over digital interfaces such as the JUMO digiLine bus or IO-Link
■ Easy, time-saving bus cable installation with read-to-use cable (available as accessory)
■ Sensor calibration on a PC with storage of the calibration data in the JUMO digiLine electronics
■ Easy and time-saving Plug & Play installation on the JUMO AQUIS touch S/P
■ Extensive range of various interfaces for various customer requirements (JUMO digiLine, IO-Link, analog standard signals or binary switching signals)
|
202763 、 202769 、 202764 、 202765 、 202922 、 202923 、 202924 、 202924/10 、 202763/10-10-8-01-0010-1005-104-85-26-JUMO/61,62 、 202764/10-10-8-01-0010-1003-687-86-84-JUMO/61,62 、 202765/10-10-8-01-0010-1003-613-31-31-JUMO/61,62 、 202766/10-10-8-01-0010-1003-613-31-31-JUMO/61,62 、 202767/10-10-8-01-0010-1005-997-31-31-JUMO/955,956 、 202768/10-10-8-01-0010-1003-105-88-84-JUMO/61,62 、 202769/10-10-8-01-0500-1005-997-18.0-79-31-JUMO/61,62 、 00638341 、 00638337 、 00638333 、 00638324 、 00638322 、 00638315 、 00638313 、 00638312 、 00638327 、 00646871 、 00661597 、 00461591 、 00444307 、 00655787 、 00444312 、 00486503 |
|
|
|
|
|
Datasheet |
|
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
|
2020-03-23 |
|
|
V4.00 |
|
|
00691223 |
|
|
1.5 MB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
