ATSAMR30M Sensor Board User's Guide

2021-07-05
●Introduction:
■The ATSAMR30M Sensor Board (DT100130) is a hardware platform used to evaluate the performance of the ATSAMR30M18A (Sub-1 GHz IEEE® 802.15.4™ compliant) RF module. The sensor board provides easy access to various ready-to-use applications supported by the ATSAMR30M18A module in the Atmel Studio Integrated Development Platform (IDP). This document describes how to get started with the sensor board and how to integrate the module in a custom design. The sensor board provides 802.15.4 wireless functionality to the mikroBUS™compatible Clicker Board evaluation platform in the 800/900 MHz ISM band.
●Features:
■ATSAMR30M18A Module is an IEEE 802.15.4 Compliant Wireless Module for 700/800/900 MHz(1) Applications
▲ATSAMR30E18A (ARM® Cortex® -M0+) System-in-a-Package (SiP)
▲Single-ended RF output through the PCB castellated pad
▲Radio module with a link budget
◆RX sensitivity up to -105(2) dBm
◆TX output power up to 8.7(2) dBm
▲High precision 16 MHz crystal oscillator
■On-board PCB Antenna
■On-board AT30TSE758A Digital Temperature Sensor
▲Integrated temperature sensor, non-volatile registers and serial EEPROM
▲2-wire I2C and SMBus compatible serial interface
■Footprint Provision for Evaluating CryptoAuthentication™ Device (ATECC608A/ATECC508A)
■Power Supply Options
▲Battery holder for a standard 3V CR2450 coin/button cell battery
▲Header (J5) for external supply
▲Clicker receptacle (J1) for supply from a Click board
■Serial Wire Debug (SWD) Header
■Digital I/O
▲Clicker receptacles comprising SPI, I2C and UART interfaces of ATSAMR30M18A
▲One RESET button and one user button
▲One user LED
■Supports Performance Analyzer Example Application in Atmel Studio
■Operating Temperature Range: -40°C to +85°C

MICROCHIP

ATSAMR30M

More

Part#

Sensor Board

More

More

User's Guide

More

More

Please see the document for details

More

More

English Chinese Chinese and English Japanese

2021/05/26

Revision A

DS50003015A

4.3 MB

  • +1 Like
  • Add to Favorites

Recommend

All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.

Contact Us

Email: