XCKU025 Kintex UltraScale FPGAs Data Sheet

2021-06-16
●Summary:
■The Xilinx® Kintex® UltraScale™ FPGAs are available in -3, -2, -1, and -1L speed grades, with -3 having the highest performance. The -1L devices can operate at either of two VCCINT voltages, 0.95V and 0.90V and are screened for lower maximum static power. When operated at VCCINT= 0.95V, the speed specification of a -1L device is the same as the -1 speed grade. When operated at VCCINT= 0.90V, the -1L performance and static and dynamic power is reduced.
■DC and AC characteristics are specified in commercial, extended, industrial, and military temperature ranges. Except the operating temperature range or unless otherwise noted, all the DC and AC electrical parameters are the same for a particular speed grade (that is, the timing characteristics of a -1 speed grade industrial device are the same as for a -1 speed grade commercial device). However, only selected speed grades and/or devices are available in each temperature range.
■All supply voltage and junction temperature specifications are representative of worst-case conditions. The parameters included are common to popular designs and typical applications.
■This data sheet, part of an overall set of documentation on the UltraScale architecture-based devices, is available on the Xilinx website at www.xilinx.com/documentation.

Xilinx

XCKU025XCKU035XCKU040XCKU060XCKU085XCKU095XCKU115XQKU040XQKU060XQKU095XQKU115

More

Part#

Kintex UltraScale FPGAs

More

More

Datasheet

More

More

Please see the document for details

More

More

English Chinese Chinese and English Japanese

September 22, 2020

v1.19

DS892

2.4 MB

- The full preview is over. If you want to read the whole 83 page document,please Sign in/Register -
  • +1 Like
  • Add to Favorites

Recommend

All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.

Contact Us

Email: