RF-DG-40A Bluetooth Low Energy 5.0 nRF52840 USB Dongle
■The nRF52840 Dongle is a small, low-cost USB dongle that supports Bluetooth®Low Energy 5, Bluetooth mesh, Thread, ZigBee, 802.15.4, ANT and 2.4 GHz proprietary protocols. The Dongle is the perfect target hardware for use with nRF Connect for Desktop as it is low-cost but still support all the short range wireless standards used with Nordic devices. The dongle has been designed to be used as a wireless HW device together with nRF Connect for Desktopas well as programming through nRFUtil. For other use cases please do note that there is no debug support on the Dongle, only support for programming the device and communicating through USB.It can also be used to develop code for the nRF52840 SoC mounted on the dongle. Programming is supported through a USB enabled bootloader. Connectors for external debuggers are available.It is supported by most of the nRF Connect for Desktop APPs and will automatically be programmed if needed. In addition custom applications can be compiled and downloaded to the Dongle. It has a user programmable RGB LED, a green LED, a user programmable button as well as 15 GPIO accessible from castellated solder points along the edge. Example applications are available in the nRF5 SDK under the board name PCA10059.
●Key Features:
■Bluetooth 5 ready multiprotocol radio
▲2 Mbps
▲Long Range
▲Advertising Extensions
▲Channel Selection Algorithm #2 (CSA #2)
■IEEE 802.15.4 radio support
▲Thread
▲Zigbee
■Arm®CortexTM-M4 with floating point support
■DSP instruction set
■Arm CryptoCell CC310 cryptographic accelerator
■15 GPIO available via edge castellation
■USB interface direct to nRF52840 SoC
■Integrated 2.4 GHz PCB antenna
■1 user-programmable button
■1 user-programmable RGB LED
■1 user-programmable LED
■1.7 V ~ 5.5 V operation from USB or external
■NFC available
USB Dongle 、 Bluetooth Low Energy 、 cryptographic accelerator |
|
[ Advanced wearables ][ Advanced personal fitness devices ][ Connected health ][ IoT ][ Connected home sensors and controllers ][ Industrial IoT sensors and controllers ][ Interactive entertainment devices ][ Advanced remote controls ][ Gaming controllers ][ Virtual/Augmented Reality applications ] |
|
Datasheet |
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
2020.03.26 |
|
V1.0 |
|
|
|
1.4 MB |
- +1 Like
- Add to Favorites
Recommend
- RF-STAR NRF52840 Multiprotocol SOC Provides a Solid Security Guarantee for Online Encryption Assets
- RF-STAR RF-DG-40A Dongle——In-Depth Analysis of the Improvement of Nordic‘s Dongle Based on nRF52840
- RF-STAR Modules Using Nrf52840 SOC Chips are Widely Used in Wearable Devices
- RF-DG-32A USB Sniffer Based on NRF52832 Chip Launched by RF-STAR , Which Supports Major Wireless Standards
- RF-STAR’s New Modules Adopt NRF52833 Chip Will Come Soon
- RF-STAR Bluetooth modules with nRF52811 provide fast BLE for communication between customer products and smart mobile devices solution
- RF-STAR Low Power Consumption BLE RF Modules RF-BM-ND05 Based on NRF52840 Chip
- nRF52840 Chip Bluetooth 5.0 Module: 300m Transmission Distance and 24Mbps Transmission Speed
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.