UG374: EFR32ZG14 Zen Gecko Wireless Starter Kit User's Guide

2021-04-20
A Wireless Starter Kit with the BRD4201A Radio Board is an excellent starting point to get familiar with the EFR32 Zen Gecko Z-Wave® Wireless System-on-Chip. It also provides the necessary tools for developing a Silicon Labs Z-Wave gateway application.
BRD4201A is a plug-in board for the Wireless Starter Kit Mainboard. It is a complete reference design for the EFR32ZG14 Wireless SoC, realizing the matching network with an Integrated Passive Device (IPD). The board features an SMA connector for RF connection, or a PCB antenna that can be selected by moving a 0 Ω resistor.
The Wireless Starter Kit Mainboard contains an on-board J-Link debugger with a Packet Trace Interface and a virtual COM port, enabling application development and debugging the attached radio board as well as external hardware. The mainboard also contains sensors and peripherals for easy demonstration of some of the EFR32's many capabilities.
This document describes how to use the BRD4201A Radio Board together with a Wire-less Starter Kit Mainboard.

Silicon Labs

BRD4201AEFR32EFR32ZG14Si7021EFR32ZG14P231F256GM32SLWRB4201ABRD8010ACR2032EFM32EFM8EZR32

More

Part#

Wireless Starter KitRadio BoardZ-Wave® Wireless System-on-ChipWireless SoC

More

More

User's Guide

More

More

Please see the document for details

More

More

English Chinese Chinese and English Japanese

February 2019

Rev. 1.1

UG374

2.1 MB

- The full preview is over. If you want to read the whole 31 page document,please Sign in/Register -
  • +1 Like
  • Add to Favorites

Recommend

All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.

Contact Us

Email: