PL5500 High Efficiency 4-Switch Bidirectional Buck-Boost Controller
PL5500 employs Constant ON time control in buck,boost and buck-boost operation modes for superior load and line regulation. The switching frequency could beset to 150kHz, 300kHz, 600kHz or 1200kHz based on different resistor value between FREQ pin and GND pin. The device also features a programmable soft-start function and offers all kinds of protection features including cycle-by-cycle current limiting, input under voltage lockout (UVLO), output over voltage protection (OVP), input Over Voltage Protection, thermal shutdown and output short protection etc.
VADJ, IADJ pins are used to program output VBUS voltage and output current limit at battery discharging mode when OTG is high, which makes PL5500 an excellent option for USB Power Delivery(PD) application. PL5500 provides voltage control loop, constant current loop, thermal regulation loop, battery temperature sensing, which makes it a perfect solution for batter charge management.
High Efficiency 4-Switch Bidirectional Buck-Boost Controller |
|
[ Automotive Start-Stop Systems ][ Backup Battery and Super capacitor Charging ][ Industrial PC Power Supplies ][ USB Power Delivery ] |
|
Datasheet |
|
ESD(HBM,2kV) |
|
Please see the document for details |
|
|
|
|
|
QFN4x4-32 |
|
English Chinese Chinese and English Japanese |
|
2018-08-18 |
|
Rev. 1.0 |
|
|
|
2.1 MB |
- +1 Like
- Add to Favorites
Recommend
- Bringing Buck Converter, Boost Converter and More, Shenzhen Powlicon Announced a Distribution with Sekorm
- PL83081 Dual Constant Current Step-Down Switching Converter
- Renesas Buck-Boost DC/DC Converter with Ultra-Low Quiescent Current for Powering Sensors, MCUs, Wireless Devices
- Use Renesas Buck-boost Converter ISL9122 to Conserve Battery Power in IoT Devices
- Renesas Offers A Complete Portable Power Tool Solution
- EPC Launches a New Generation of the 80V, 4mOhm EPC2619 eGaN FETs that Doubles Performance
- [产品]日清纺300mA的稳压器R1526,输出电压范围为1.8~9.0V,具有过电流保护
- [经验]瑞萨32位MCU RA2E1如何利用FSP工具生成sci_uart的配置代码
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.