RF-SM-1077B2 Ultra-Low-Power 433 MHz & 470MHz Wireless Module
■Description
●RF-SM-1077B2 Sub-1 GHz module is based on TI CC1310, which combines a flexible, very low-power RF transceiver with a powerful 48 MHz ARM®Cortex®-M3 microcontroller supporting multiple physical layers and RF standards and a dedicated radio controller Cortex®-M 0handling RF protocol commands that are stored in ROM or RAM. RF-SM-1077B2 integrates a 24.0 MHz crystal, a balun, a band pass filter, an antenna matching and an IPEX antenna matching which make the module low cost, low power consumption and long wireless communication in Sub-1GHz.
●RF-SM-1077B2 is flashed transparent transmission firmware with AT commands by default. The default values are as follows: 115200 baud rate, 8 data bit, no parity check bit,1 stop bit, 433MHz operating frequency, 15dBm TX power. When the module starts to work, the serial port will print “Application Start\r\n”, and start transparent transmission mode by default, serial port will transmit all the data except “+++”, please refer to the AT command in detail.
[ ISM systems ][ SRD systems ][ Low-power wireless systems ][ Home automation ][ building automation ][ Wireless alarm systems ][ security systems ][ Industrial Monitoring ][ Industrial Control ][ Smart grid meter reading ][ Smart automatic meter reading ][ Wireless healthcare applications ][ Wireless sensor networks ][ Active RFID ][ IP-enabled smart objects ][ wireless M-Bus ][ KNX systems ][ Wi-SU ][ proprietary systems ][ Energy-harvesting applications ][ Electronic shelf label ][ ESL ][ Long-range sensor applications ][ Heat-cost allocators ] |
|
Datasheet |
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
Aug. 02, 2018 |
|
Version 2.1 |
|
|
|
4.2 MB |
- +1 Like
- Add to Favorites
Recommend
- RF-STAR RF-DG-40A Dongle——In-Depth Analysis of the Improvement of Nordic‘s Dongle Based on nRF52840
- RF-STAR’s New Modules Adopt NRF52833 Chip Will Come Soon
- RF-STAR Has Launched RF Modules Support Zigbee, BLE, Thread, and Other Multi-protocol Operations
- RF-STAR Launched The CC2640R2L Module With A Lower Cost And High Performance
- RF-DG-32A USB Sniffer Based on NRF52832 Chip Launched by RF-STAR , Which Supports Major Wireless Standards
- RF-STAR‘s Active Bluetooth IC Card Enables Gas Recharging at Home
- RF-star’s Development Kits of CC2340 BLE Modules Accelerate Projects
- RF-STAR Focused on the Bluetooth Field and Has Rich Experience in Solution Design
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.