RF-SM-1044B2 Ultra-Low-Power 868 MHz Module
■RF-SM-1044B2 is an RF module based on TI SimpleLink™ ultra-low-power Sub-1 GHz wireless SoC CC1310F128RSM with 48 MHz ARM®Cortex®-M3 processor. It integrates a 24MHz crystal, a balun, a SAW filter,an antenna matching and a half-hole antenna interface. It features low power consumption, small size, robust connection distance, and rigid reliability. It supports 868 MHz ISM application and can be preprogrammed with a serial interface communication protocol for simple programming. 1.27-mm pitch stamp stick package for easy assembling and cost-effective PCB design.
●Key Features:
■RF Performance
▲Excellent receiver sensitivity using long-range mode: -119dBm
▲Excellent receiver sensitivity at 50 kbps: -100dBm
▲Excellent selectivity (±100 kHz): 56 dB
▲Excellent blocking performance (±10 MHz): 90 dB
▲Programmable output power: up to +15 dBm
▲Differential RF interface
▲Suitable for systems targeting compliance with worldwide radio frequency regulations:
◆ETSI EN 300 220, EN 303 204 (Europe)
◆FCC CFR47 Part 15 (US)
◆ARIB STD-T108 (Japan)
▲Wireless M-Bus (EN 13757-4) and IEEE®802.15.4g PHY
■Microcontroller
▲Powerful ARM®Cortex®-M3 processor, 48 MHz
▲EEMBC CoreMark®Score: 142
▲EEMBC ULPBench™ Score: 158
▲Clock speed up to 48 MHz
▲128 KB of in-system programmable flash
▲8 KB of SRAM for cache (or as general-purpose RAM)
▲20 KB of ultra-low-leakage SRAM
▲2pin cJTAG and JTAG debugging
▲Supports Over-the-Air (OTA) update
▲Ultra-low-power clocked comparator
▲Programmable current source
▲UART
▲2× SSI (SPI, MICROWIRE, TI)
▲I²C, I²S
■Ultra-low-power Sensor Controller
▲Can run autonomously from the rest of the system
▲16 Bit architecture
▲2 KB of ultra-low-leakage SRAM for code and data
■Low Power
▲Wide supply voltage range: 1.8 V ~ 3.8 V
▲RX: 5.4 mA
▲TX at +10 dBm: 13.4 mA
▲Active-mode MCU 48 MHz running Coremark: 2.5 mA (51 μA/MHz)
▲Active-mode MCU: 48.5 CoreMark/mA
▲Active-mode sensor controller at 24 MHz: 0.4 mA + 8.2 μA/MHz
▲Sensor controller, one wake
▲up every second performing one 12 Bit ADC sampling: 0.95 μA
▲Standby: 0.7 μA (RTC running and RAM and CPU retention)
▲Shutdown: 185 nA (wakeup on external events)
■Peripheral
▲All digital peripheral pins can be routed to any GPIO
▲Four general-purpose timer modules (eight 16-bit or four 32
▲Bit timers, PWM each)
▲12 bit ADC, 200 ksamples/s, 8 channel analog MUX
▲Continuous time comparator
▲Real-time clock (RTC)
▲AES-128 security module
▲True random number generator (TRNG)
▲Support for eight capacitive sensing buttons
▲Integrated temperature sensor
RF-SM-1044B2 、 RF-SM-1077B1 、 RF-SM-1077B2 、 RF-SM-1044B1 、 RF-SM-1044B4 、 RF-TI1352B1 、 CC1310F128RGZ 、 CC1310F128RSM 、 CC1352R 、 CC131X |
|
[ 868 MHz ISM and SRD system ][ Low-power wireless systems with 50 kHz to 5MHz Channel Spacing ][ Home and building automation ][ Wireless alarm and security systems ][ Industrial monitoring and control ][ Smart grid and automatic meter reading ][ Wireless sensor networks ][ Active RFID ][ IEEE 802.15.4g ][ IP-enabled smart objects (6LoWPAN) ][ wireless M-Bus ][ KNX systems ][ Wi-SUN™ ][ proprietary systems ][ Energy-harvesting applications ][ Electronic shelf label (ESL) ][ Long-range sensor applications ][ Heat-cost allocators ] |
|
Datasheet |
|
|
|
Please see the document for details |
|
|
|
|
|
SMT |
|
English Chinese Chinese and English Japanese |
|
2020.04.09 |
|
V2.1 |
|
|
|
1.3 MB |
- +1 Like
- Add to Favorites
Recommend
- RF-STAR RF-DG-40A Dongle——In-Depth Analysis of the Improvement of Nordic‘s Dongle Based on nRF52840
- RF-STAR’s New Modules Adopt NRF52833 Chip Will Come Soon
- RF-STAR Has Launched RF Modules Support Zigbee, BLE, Thread, and Other Multi-protocol Operations
- RF-STAR Launched The CC2640R2L Module With A Lower Cost And High Performance
- RF-DG-32A USB Sniffer Based on NRF52832 Chip Launched by RF-STAR , Which Supports Major Wireless Standards
- RF-STAR‘s Active Bluetooth IC Card Enables Gas Recharging at Home
- RF-star’s Development Kits of CC2340 BLE Modules Accelerate Projects
- RF-STAR Focused on the Bluetooth Field and Has Rich Experience in Solution Design
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.