Syncronising Xsens Systems with Vicon Nexus Step-by-step manual
The steps described below show how to configure the Xsens systems to trigger a recording in Vicon Nexus, using the Xsens Awinda Station (or Xsens Sync Station), and Xsens software (MVN Studio BIOMECH or MT Manager), a recording can be triggered in Vicon Nexus using the Vicon MX hardware.
1.Perform the calibration and get bothsystems fully set.
2.Set the specifications for synchronization in both systems and connect sync cable(s)
3.Start the recording on the slave software. The slave software will wait for a trigger from the Master software to start recording.
4.Start the recording on the Master software. Then, both systems will start recording at the same time.
5.Stop recording on the master software. Then both systems will stop recording at the same time.
Depending on the type of synchronization performed different specifications are required for both systems. A detailed explanation of the different characteristics according to the desired synchronization are described below.
This document is written to synchronize the XSens Awinda system. However, most of the steps performed in the MVN software are the same for the MVN Link system. You can see the differences in the setup of the system in the last chapter of this document “Using MVN Link to synchronize”.
|
|
|
|
|
|
|
User's Guide |
|
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
|
16-01-2020 |
|
|
|
|
|
|
|
|
489 KB |
- +1 Like
- Add to Favorites
Recommend
- Xsens, the first inertial sensor module manufacturer supporting RTK function, continues to innovate 3D motion tracking technology and products
- Técnico Solar Boat: Hydrofoil Control Using Xsens MTi-G-710 Sensor
- How Neckcare Uses the Xsens DOT Sensor for Scientific Motion Analysis?
- Xsens Inertial Sensor Module Helps Improve Rail Safety with Intelligence on Wheels
- ROV with Xsens MTi-3 Sensor Inside Performs Geotagged Visual Inspections Underwater
- How StepLab is Transforming The Physical Lives of the Elderly with XSENS DOT？
- Xsens GNSS/INS Integrated In Alternative For FOG-based TSPI System
- Xsens Introduces New Rugged Mti Modules For Harsh Environments
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
