SGM6602 20V Output Voltage Step-Up Converter

2020-04-26
The SGM6602 is a highly integrated boost converter

designed for applications requiring high voltage and

tiny solution size such as PMOLED panel and sensor

module. The SGM6602 integrates a 20V power switch,

and an input/output isolation switch. It can output up to

20V from input of a Li+ battery or two cell alkaline

batteries in series.

The SGM6602 operates with a switching frequency at

1.1MHz. This allows the use of small external

components. The SGM6602 has an internal default 9V

or 12V output voltage setting by connecting the FB pin

to the VIN pin. Thus it only needs three external

components to get 9V or 12V output voltage. Together

with CSP package, the SGM6602 gives a very small

overall solution size. The SGM6602 has typical 900mA

switch current limit. It has 5ms built-in soft-start time to

minimize the inrush current. When the SGM6602 is in

shutdown mode, the isolation switch disconnects the

output from input to minimize the leakage current. The

SGM6602 also implements output short-circuit protection,

output over-voltage protection and thermal shutdown.

The SGM6602 is available in Green WLCSP-0.8×1.2-6B

and TDFN-2×2-6L packages. It operates over an

ambient temperature range of -40℃ to +85℃.

SGMICRO

SGM6602SGM6602-9SGM6602-9YG/TRSGM6602-9YTDI6G/TRSGM6602-12SGM6602-12YG/TRSGM6602-12YTDI6G/TRFDSD0420-H-100MCDRH3D23/HP1239AS-H-100MVLS4012-4R7MSGM6602 -9SGM6602 -12

More

Part#

20V Output Voltage Step-Up Converter

More

PMOLED Power Supply ]Wearable Devices ]Portable Medical Equipment ]Sensor Power Supply ]

More

Datasheet

More

ESD(CDM,1000V) 、 ESD(HBM,5000V) 、 ESD(MM,300V) 、 HSF 、 Halogen Free 、 Pb-Free 、 RoHS

More

Please see the document for details

More

More

WLCSP-0.8×1.2-6B;TDFN-2×2-6L

English Chinese Chinese and English Japanese

DECEMBER 2017

REV.A

1.2 MB

- The full preview is over. If you want to read the whole 15 page document,please Sign in/Register -
  • +1 Like
  • Add to Favorites

Recommend

All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.

Contact Us

Email: