ACS720 High Accuracy, Dual Fault, Galvanically IsolatedCurrent Sensor in SOIC16 Wide-Body Package
●DESCRIPTION
■The ACS720 is a high accuracy Hall-effect-based current sensor IC with multiple programmable fault levels intended for industrial and consumer applications with a focus on motor control and power inverter stage applications.
■One of the key benefits of the ACS720 is to provide high isolation with a reduced bill of materials made possible by the proprietary IC SOIC16W package. The ACS720 works off of a single 5 V supply while maintaining an output voltage swing from 0 to 3 V, with a stable zero current output of 1.5V. This allows the ACS720 to operate off of a 5 V supply while having an output which is compatible with typical 3.3 V ADCs found on many MCUs. Furthermore, the ACS720’s high PSRR rejects the noise often found on the supplies in the power section of the PCB or system, maintaining high accuracy in noisy environments
■The device has dual fault functions that are user configurable. Fast and slow fault output allow for short-circuit and overcurrent fault detection. A user-created resistor divider from the power supply of the ACS720 is used to set the fault level. The fault outputs are open drain, allowing the user to pull them up to a compatible voltage for the MCU. The open-drain outputs also allow for implementing a simple logical OR of multiple sensor fault outputs.
■The ACS720 also integrates differential current sensing, which rejects external magnetic fields, greatly simplifying board layout in 3-phase motor applications
■Near closed-loop accuracy is achieved in this open-loop sensor due to Allegro’s patented, digital temperature compensation, ultimately offering a smaller and more economical solution for many current sensing applications that traditionally rely on closed-loop core based sensors
■The ACS720 is provided in a small surface-mount SOIC16 package. The leadframe is plated with 100% matte tin, which is compatible with standard lead (Pb) free printed circuit board assembly processes. Internally, the device is Pb-free, except for flip-chip high-temperature Pb-based solder balls, currently exempt from RoHS. The device is fully calibrated prior to shipment from the factory.
●FEATURES AND BENEFITS
■Differential current sensing cancels common mode fields, simplifying PCB layout
■Two user-settable faults for fast short-circuit protection and slower overcurrent detection
■Industry-leading noise performance with greatly improved bandwidth through proprietary amplifier and filter design techniques
■Patented integrated digital temperature compensation circuitry allows high accuracy over temperature in an open loop sensor
■1.0mΩ primary conductor resistance for low power loss and high inrush current-withstanding capability
■Small footprint, low-profile SOIC16 package suitable for space-constrained applications
■Integrated shield virtually eliminates capacitive coupling from current conductor to die due to high dV/dt voltage transients
■5 V single supply operation with 0-3 V output swing
■Output voltage proportional to AC or DC current
■Factory-trimmed sensitivity and quiescent output voltage for improved accuracy
■3600 Vrms Dielectric Strength certified under UL60950-1
■High PSRR for noisy environment
|
ACS720 、 ACS720KLATR-15AB-T 、 ACS720KLATR-15AB-T-4 、 ACS720KLATR-35AB-T 、 ACS720KLATR-35AB-T-4 、 ACS720KLATR-65AB-T 、 ACS720KLATR-65AB-T-4 、 ACS720KLATR-80AB-T 、 ACS720KLATR-80AB-T-4 、 x15AB 、 x15AB-4 、 x35AB 、 x35AB-4 、 x65AB 、 x65AB-4 、 x80AB 、 x80AB-4 、 ASEK720 |
|
|
Datasheet |
|
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
|
SOICW;SOIC16 |
|
|
English Chinese Chinese and English Japanese |
|
|
December 7, 2018 |
|
|
Rev. 8 |
|
|
|
|
|
3.3 MB |
- +1 Like
- Add to Favorites
Recommend
- Crocus Technology Acquired by Allegro MicroSystems to Accelerate Innovation in TMR Sensing Technology
- Melexis Unveils Automotive 200-2000A Current Sensors with Integrated Overcurrent Detection
- Crocus Current Sensors Offers Solar Inverters High Accuracy, High Bandwidth and Low Noise
- Melexis Launches the MLX91230 Current Sensors Which Brings 0.5% Accuracy in a Compact Design
- Melexis Introduces Next Generation of Isolated Integrated Current Sensors for Automotive Applications
- In 2022, Melexis’ Outperforming Product Lines Were Current Sensors, Embedded Drivers, Magnetic Position Sensors, and Temperature Sensors
- ZETTLER Magnetics ACST Current Sensors Used in Charging of Electric Vehicles
- Melexis Reveals High-accuracy Current Sensors Optimized for Affordable E-mobility
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
