SMCC Product Change Notice 000310
●Concerning Part Name: SMCC & SMCC/N Series
●Product Type: Leaded Inductor {Radial}
●Classification of Change: Mechanical
●Description of Change:To eliminate the insulation paint on the bent upper lead and change the spacing between the lead and the coil body from 0.2 mm min to 0.4 mm min.
●Note: All dimensions in mm.
●Reason: To continually improve our inductors by making them and the process more environmental friendly.
●Expected Influence: Not influence in electrical parameters.
●Product Identification: Not applicable
●Product Availability: Mid of April 2010.
|
|
|
|
PCN/EOL |
|
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
|
16th March 2010 |
|
|
|
|
|
000310 |
|
|
76 KB |
- +1 Like
- Add to Favorites
Recommend
- FASTRON 0402AQC Chip Inductor Series with High Q, Low Rdc and High DC
- FASTRON 0603FLP, a Series of Semi-shielded Wire-wound Chip Inductors Being Approved for Automotive Applications
- FASTRON 242418FP- A Non-shielded SMD Chip Inductors for Power Applications Due to Its Small Size of 6.1x6.2x4.5mm
- FASTRON 0603AQC High Current Ceramic Chip Inductor Series with Exceptionally Higher Q and Size 0603
- CCM Series | Axial Leaded Inductors with Phenolic Core, Available with ±10%, ±20% Inductance Tolerance
- Vincotech‘s fastPACK 0 MOS and fastPACK 1 MOS Modules Featuring Cost-effective H-bridge Topology with MOSFETs
- Chockfast® Dual Grouting System Prolongs Ball Mill Service Life at Processing Plant
- Chockfast® Red Absorbs Vibration and Maintains Alignment for Natural Gas Compressor Skid
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
