CCM Series | Axial Leaded Inductors with Phenolic Core, Available with ±10%, ±20% Inductance Tolerance

2020-11-19 Fastron
Axial Leaded Inductor,05CCM,06CCM,08CCM

Fastron expands its portfolio of Axial Leaded Inductors and adds 4 new non-magnetic variants – 05CCM, 06CCM, 08CCM and 12CCM - of leaded inductors to the catalog.



The 4 new chokes differentiate in size and – of course - in electrical parameters. The new series of inductors shares the exclusive use of a phenolic core as well as enameled copper wire for lowest coil resistance. All chokes are available with ±10% and ±20% inductance tolerance. 05CCM, 06CCM and 08CCM are covered with an epoxy coating and colour coding, the 12CCM is offered with tube. As the new chokes are non-magnetic, they can be used in Magnetic Resonance Imaging environmental applications. In addition - compared with standard axial leaded chokes - the new series offer exceptional high Q and performs best in HF applications, e.g. in resonant circuits, filter sections and in distortion correction.


The operating temperature of the new series is -55°C to +125°C including self-heating of the component. As with all FASTRON components, the 05CCM, 06CCM, 08CCM and 12CCM are suitable for lead-free soldering and RoHS compliant. All 4 series are available taped in reel and taped in ammo pack, except 12CCM, which is available in tape & reel only.


Key Specification


  • +1 Like
  • Add to Favorites

Recommend

This document is provided by Sekorm Platform for VIP exclusive service. The copyright is owned by Sekorm. Without authorization, any medias, websites or individual are not allowed to reprint. When authorizing the reprint, the link of www.sekorm.com must be indicated.

Contact Us

Email: