ACS716 120 kHz Bandwidth, High-Voltage Isolation Current Sensor with Integrated Overcurrent Detection Data sheet
●DESCRIPTION
■The Allegro™ ACS716 current sensor provides economical and precise means for current sensing applications in industrial, commercial, and communications systems. The device is offered in a small footprint surface-mount package that allows easy implementation in customer applications.
■The ACS716 consists of a precision linear Hall sensor integrated circuit with a copper conduction path located near the surface of the silicon die. Applied current flows through the copper conduction path, and the analog output voltage from the Hall sensor linearly tracks the magnetic field generated by the applied current. The accuracy of the ACS716 is maximized with this patented packaging configuration because the Hall element is situated in extremely close proximity to the current to be measured.
■High-level immunity to current conductor dV/dt and stray electric fields, offered by Allegro proprietary integrated shield technology, results in low ripple on the output and low offset drift in high-side, high-voltage applications.
■The voltage on the Overcurrent Input (VOC pin) allows customers to define an overcurrent fault threshold for the device. When the current flowing through the copper conduction path (between the IP+ and IP– pins) exceeds this threshold, the open drain Overcurrent Fault pin will transition to a logic low state. Factory programming of the linear Hall sensor inside of the ACS716 results in exceptional accuracy in both analog and digital output signals.
■The internal resistance of the copper path used for current sensing is typically 1 mΩ, for low power loss. Also, the current conduction path is electrically isolated from the low-voltage sensor inputs and outputs. This allows the ACS716 family of sensors to be used in applications requiring electrical isolation, without the use of optoisolators or other costly isolation techniques.
■The ACS716 is provided in a small, surface-mount SOIC16 package. The leadframe is plated with 100% matte tin, which is compatible with standard lead (Pb) free printed circuit board assembly processes. Internally, the device is Pb-free, except for flip-chip high-temperature Pb-based solder balls, currently exempt from RoHS. The device is fully calibrated prior to shipment from the factory.
●FEATURES AND BENEFITS
■Industry-leading noise performance with greatly improved bandwidth through proprietary amplifier and filter design techniques
■Small footprint package suitable for space-constrained applications
■1 mΩ primary conductor resistance for low power loss
■High isolation voltage, suitable for line-powered applications
■User-adjustable Overcurrent Fault level
■Overcurrent Fault signal typically responds to an overcurrent condition in < 2 μs
■Integrated shield virtually eliminates capacitive coupling from current conductor to die due to high dV/dt voltage transients
■Filter pin capacitor improves resolution in low bandwidth applications
■3 to 3.6 V single supply operation
■Factory-trimmed sensitivity and quiescent output voltage
■Chopper stabilization results in extremely stable quiescent output voltage
■Ratiometric output from supply voltage
|
ACS716 、 ACS720 、 ACS716KLATR-6BB-T2 、 ACS716KLATR-12CB-T2 、 ACS716KLATR-25CB-T2 、 ACS716KLATR-6BB-NL-T2 、 ACS716KLATR-12CB-NL-T2 、 ACS716KLATR-25CB-NL-T2 |
|
|
Bandwidth, High-Voltage Isolation Current Sensor 、 Isolation Current Sensor |
|
|
[ Motor control ][ protection ][ Load management ][ overcurrent detection ][ Power conversion ][ battery monitoring / UPS systems ] |
|
|
Datasheet |
|
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
|
SOIC |
|
|
English Chinese Chinese and English Japanese |
|
|
February 1, 2019 |
|
|
Rev. 9 |
|
|
ACS716-DS |
|
|
1.9 MB |
- +1 Like
- Add to Favorites
Recommend
- Crocus Technology Acquired by Allegro MicroSystems to Accelerate Innovation in TMR Sensing Technology
- XELA Robotics Demonstrates Latest Tactile Sensors at ICRA 2024 in Yokohama
- FSR Angel 1 LPS Invests in XELA Robotics’ Global Expansion
- China‘s First Manufacturer of Mass-Produced Fluxgate Current Sensors——TransFar
- Crocus Current Sensors Offers Solar Inverters High Accuracy, High Bandwidth and Low Noise
- What Is A Current Sensor? What Are The Classifications of Current Sensors?
- Melexis Launches the MLX91230 Current Sensors Which Brings 0.5% Accuracy in a Compact Design
- ZETTLER Magnetics ACST Current Sensors Used in Charging of Electric Vehicles
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
