FLXA21 Model 2-Wire Analyzer General Specifications
●General
■The model FLXA™ 21 2-Wire Analyzer, one model of FLEXA™ series, offers single or dual sensor measurement. The modular-designed analyzer offers 4 kinds of measurements – pH/ORP (oxidation-reduction potential), contacting conductivity (SC), inductive conductivity (ISC) or dissolved oxygen (DO) – with the respective sensor module.
■For dual sensor measurement, the combination of two same type sensor inputs – pH/ORP and pH/ORP (analog sensor only), SC and SC, and DO and DO – are available with two sensor modules. Dual sensor measurement offers additional functionalities; calculated data function and redundant system.
■Variety of calculated data from two measuring parameters is selectable for each measurement. On the redundant system built on two measuring parameters of two sensor inputs, main output parameter is automatically switched over to the second sensor output in case of the main sensor's failure condition.
■Addition to conventional analog pH/ORP sensors, the analyzer FLXA21 can be connected to Yokogawa's digital sensor, FU20F pH/ORP SENCOM™ Sensor.
■In the FLXA21 Human Machine Interface (HMI), 2-wire type analyzer FLXA21 offers easy touch screen operation and simple menu structure in 12 languages. Menus of display, execution and setting are displayed in a selected language.
■The analyzer FLXA21 automatically recognizes the installed sensor module and prepares the necessary menus for right configuration, even for dual sensor measurement.
■For immediate measurement, the FLXA21 offers quick setup functionality. The quick setup screen appears when the analyzer is powered. Only a few setups – date/time, language, basic sensor configurations and output – will start the measurement.
■The FLXA21 offers the best accuracy in measurement with temperature compensation functionality and calibration functionality. Sensor diagnostics and sensor wellness indication make measurement reliable. Logbook of events and diagnostic data is a useful information source for maintenance.
■For hazardous location, the FLXA21 has approvals of ATEX, IECEx, FM, CSA, NEPSI and KOSHA.
|
|
Datasheet |
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
Mar. 23, 2018 |
|
15th Edition |
|
GS 12A01A02-01E |
|
1.3 MB |
- +1 Like
- Add to Favorites
Recommend
- Downsize Your Design, Upsize Efficiency With Vincotech 650 V/50 A FLow3xanpfc
- DESIGN KIT INS265 Offers a Flexible and Individual Solution for DIN Rail Devices
- New 600 A, 300+ kVA flowANPC S3 split for 1500 V solar inverter
- Ultra Flat Gain Low Noise Amplifier AHL5419T8 Has Gain Decreases from 20.3dB to 20.2dB at 0.05~3.5GHz (20.5dB at 2.0GHz)
- With the DESIGN KIT INS265, PTR HARTMANN Offers a Flexible and Individual Solution for DIN Rail Devices
- Kinetic Technologies Releases Dual Channel Camera Flash Driver ICs KTD2688 and KTD2688A, with Independent LED Control
- EPC Launches a 3-phase BLDC Motor Drive Inverter EPC9173 with Embedded Gate Driver Function and a Floating Power GaN FET with 3.3mΩ RDS(on)
- Kinetic‘s New Triple Channel Camera Flash Driver IC KTD2683B Features Independent LED Control
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.