DESIGN KIT INS265 Offers a Flexible and Individual Solution for DIN Rail Devices

2024-03-31 PTR HARTMANN News
DESIGN KIT,INS265,PTR HARTMANN

In the case of devices for the DIN rail, creating a special DIN rail housing is often not a worthwhile option. Also, standard DIN rail housings are often unnecessarily wide because a separate PCB terminal block or a pin strip for the PCB connection must be used in the housing.


PTR HARTMANN’s new DIN rail housings have a standard width of 6.2 mm. The use of different housing covers allows the production of housing widths up to 15.0 mm. Up to 6 push-in wire connections in one housing are possible. The PCBs can be assembled as required by the customer, inserted into the housing and then soldered to the pre-fitted contact positions. In places where no connection points are required, blind plugs can be fitted.


Housing options

●Separating knives

●LED prisms

●Earthing foot

●Actuators for slide switches

●Universal opening for e. g. USB-C connector

●Opening for DH2 (10 and/or 16 addresses)

●Openings in the side walls

●Laser marking on the wire insertion points and/or side walls

●Different colours


Accessories

●Insulated bridges

●Labelling clips in various colours


With the new DESIGN KIT INS265 for DIN rail housings, PTR HARTMANN offers a flexible and individual solution for DIN rail devices. The push-in connections provide fast, easy assembly.

  • +1 Like
  • Add to Favorites

Recommend

This document is provided by Sekorm Platform for VIP exclusive service. The copyright is owned by Sekorm. Without authorization, any medias, websites or individual are not allowed to reprint. When authorizing the reprint, the link of www.sekorm.com must be indicated.

Contact Us

Email: