AH8113 CMOS HALL SWITCH LOW CURRENT CONSUMPTION, HIGH SENSITIVITY
designed specifically to meet the requirements of
low-power devices. e.g. as an On/Off switch in
Cellular Flip-Phones, with battery operating voltages
of 1.65V-5.5V.
Precise magnetic switching points and high
temperature stability are achieved through the unique
design of the internal circuit. An onboard clock
scheme is used to reduce the average operating
current of the IC. During the operate phase the IC
compares the actual magnetic field detected with the
internally compensated switching points. The output
Voltage is switched at the end of each operating
phase. During the Stand-by phase the output stage is
latched and the current consumption of the device
reduced to some μA.
The IC switching behavior is Omni polar; it can be
switched on with either the North or South pole of a
magnet.
The AH8113 is available in TSOT-23 and TO-92S
Packages.
AH8113 、 AH8113TE3R 、 AH8113TE3VR 、 AH8113ZSW 、 AH8113ZSVW |
|
[ Cover switch in clam-shell cellular phones ][ Cover switch in Notebook PC/PDA ][ Contact-less switch in consumer products ] |
|
Datasheet |
|
ESD(4000V) 、 Halogen free 、 RoHS |
|
Please see the document for details |
|
|
|
|
|
TSOT-23;TO-92S |
|
English Chinese Chinese and English Japanese |
|
MAR 2017 |
|
REV1.3 |
|
|
|
671 KB |
- +1 Like
- Add to Favorites
Recommend
- AiT A6303 Series——300mA, Positive Voltage Output CMOS LDO Regulators
- 512Kbit I²C Compatible Serial EEPROM AiT A24C512 Requires a Single Power Supply in the Range of 1.7V to 5.5V
- AiT A7545 current mode boost DC-DC converter with Adjustable Output up to 9V and Internal Fixed PWM frequency of 1MHz
- AiT A713 DC-to-DC Step-down Switching Regulator with High Efficiency of up to 95%, ideal for Low-voltage Power Conversions
- AiT Offers Wide Range of Highly Precise SMD/TH Crystal Components in Half Size, Full Size, Cylindrical and Tuning Fork Packages
- AiT Offers Compact SMD Power Inductors Available in SMD Size Range from 0602 to 1812
- AiT offers 1A Linear Li-ion Batteries Charger IC A4051 for Single-cell Lithium-ion Batteries
- AiT‘s A7115B: a 1.5A, 2MHz High Efficiency Buck DC-DC Converter for Powering Portable Equipment
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.