SP725 Series 5pF 8kV Diode RoHS Pb GREEN Array

2020-05-10
The SP725 is an array of SCR/Diode bipolar structures for

ESD and overvoltage protection of sensitive input circuits.

The SP725 has 2 protection SCR/Diode device structures

per input. There are a total of 4 available inputs that can be

used to protect up to 4 external signal or bus lines. Overvoltage protection is from the IN (Pins 1 - 4) to V+ or V-.

The SCR structures are designed for fast triggering at a

threshold of one +VBE diode threshold above V+ (Pin 5,6)

or one –VBE diode threshold below V- (Pin 7,8). From an

IN input, a clamp to V+ is activated if a transient pulse

causes the input to be increased to a voltage level greater

than one VBE above V+. A similar clamp to V- is activated if

a negative pulse, one VBE less than V-, is applied to an IN

input.

Refer to Fig 1 and Table 1 for further details. Refer to

Application Note AN9304 and AN9612 for further detail.

Littelfuse

SP725SP725ABGSP725ABTGSP725AB(T)GSP725AB*

More

Part#

TVS Diode Arrays5pF 8kV Diode Array

More

Microprocessor/Logic Input Protection ]Data Bus Protection ]Analog Device Input Protection ]Voltage Clamp ]

More

Datasheet

More

ESD(EIAJ IC121,MM,±2kV) 、 ESD(IEC 61000-4-2,HBM,Air,±15kV) 、 ESD(IEC 61000-4-2,HBM,±8kV) 、 ESD(MIL-STD-3015.7,Modified HBM,±25kV) 、 ESD(MIL-STD-3015.7,Standard HBM,±10kV) 、 Pb free 、 RoHS 、 UL 94 V-0

More

Please see the document for details

More

More

8 Ld SOIC

English Chinese Chinese and English Japanese

05/12/17

Revised: 05/12/17

655 KB

- The full preview is over. If you want to read the whole 6 page document,please Sign in/Register -
  • +1 Like
  • Add to Favorites

Recommend

All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.

Contact Us

Email: