600V XPT IGBTs NEW DISCRETE 600V EXTREME LIGHT PUNCH THROUGH XP IGBTS PRODUCT BRIEF

PublishTime：2020-07-16

IXYS expands its benchmark XPT IGBT portfolio with new 600V discrete XPT IGBTs. These new discrete IGBTs are especially tailored to address market demands for highly rugged, low loss semiconductor devices that offer the ability to be easily configured in parallel. The featured devices demonstrate superior performance and exceptional ruggedness in applications such as power inverters, uninterruptible power supplies, motor drives, switch mode power supplies, power factor correction circuits, battery chargers, welding machines, and lamp ballasts.
The introduced 600V XPT IGBTs are available with collector current (Ic) ratings from 100 Amperes to 210 Amperes (Tc=25oC). Developed using thin wafer technology and IXYS’ extreme light punch through (XPT) design platform, these new devices feature excellent electrical characteristics which include low typical collector to emitter saturation voltages (Vcesat as low as 1.8V), low typical current fall times (tfi as low as 42ns), and low typical turn-off energy per pulse values (Eoff as low as 0.33mJ @ Tj=25oC). In addition, they exhibit exceptional ruggedness during switching and under short circuit conditions, establishing a new benchmark regarding device ruggedness. This is achieved through a 10us short circuit safe operating area (SCSOA), dynamic avalanche ratings, and a square reverse bias safe operating area (RBSOA) rated up to the device’s blocking voltage. Furthermore, these devices feature an extended forward bias safe operating area (FBSOA), allowing for a “wider operating window” as dictated by the power limitations of the device, resulting in improved rugged-ness and reliability.
These new IGBTs are available in two distinctive speed classifications; the B3 and C3 Classes respec-tively. The B3 and C3 speed classifications present designers with a more flexible approach to device selection regarding critical requirements such as switching frequency, saturation voltage, and cost. B3-Class devices feature an excellent balance between conduction and switching losses and are optimized for hard switching frequencies from 10 kHz to 30 kHz. C3-Class devices are optimized for minimal switching losses and are recommended for hard switching frequencies from 20 kHz to 60 kHz. Additional features include a maximum operating temperature of 175 degree Centigrade and a positive forward voltage coefficient, which enables parallel operation, allowing designers the ability to utilize multiple discrete devices in parallel to achieve the desired high current requirements of their application.
These IGBTs are available with IXYS' Sonic-FRDTM and HiPerFREDTM anti-parallel ultra-fast diodes (Sonic-FRDTM – Suffix H1, ie. IXXK100N60C3H1) (HiPerFREDTM – Suffix D1, ie. IXXH50N60C3D1). The combination of XPT IGBT and Sonic-FRDTM or HiPerFREDTM ultra-fast diodes result in an optimal match for reduced turn-off losses. Furthermore the high dynamic ruggedness, combined with the smooth switching behavior of IXYS' Sonic-FRDTM or HiPerFREDTM anti-parallel ultra-fast diodes provides users the greatest freedom in designing their systems without the need for any dV/dt or peak-voltage limiters such as snubbers or clamps. Moreover, it allows the XPT IGBT to be switched on at very high di/dt’s regardless of low current and temperature condition and provides excellent EMI performance despite the level of the switched current. The extended SOA of these devices also allows for higher switching speeds, which in turn translate into lower switching losses.

Brand of Product：	Littelfuse
Part#：	IXXH30N60C3D1 、 IXXH30N60B3D1 、 IXXH50N60C3 、 IXXH50N60C3D1 、 MMIX1X100N60B3H1 、 IXXH50N60B3D1 、 IXXA50N60B3 、 IXXH50N60B3 、 IXXP50N60B3 、 IXXR100N60B3H1 、 IXXH75N60C3D1 、 IXXH75N60C3 、 IXXH75N60B3D1 、 IXXH75N60B3 、 IXXK100N60C3H1 、 IXXN100N60B3H1 、 IXXX100N60C3H1 、 IXXH100N60C3 、 IXXK100N60B3H1 、 IXXX100N60B3H1 、 IXXH100N60B3 、 IXXK200N60C3 、 IXXX200N60C3 、 IXXX200N60B3 、 IXXK200N60B3 More Part#
Product Category：	NEW DISCRETE 600V EXTREME LIGHT PUNCH THROUGH (XPT) IGBTS More
Application：	[ Power Inverter ][ UPS ][ SMPS ][ PFC ][ Battery chargers ][ Welding Machines ][ Lamp ballasts ][ Motor Drives ] More
Data Type：	Datasheet More
Safety & Environment Standards：	More
Operating Temperature：	Please see the document for details
Qualification Grade：	More
Qualification Approval：	More
Package：	MMIX;TO-263;ISOPLUS247;TO-247;TO-220;SOT-227;PLUS247;TO-264
Language：	English Chinese Chinese and English Japanese
Date of Creation：	April 2012
Version Number：	1.3
Data Encoding：	PB60XPTIGBT
Data Size：	1.2 MB

Data section preview(2pages)

- The full preview is over. If you want to read the whole 3 page document,please Sign in/Register -

Download

+1 Like
Add to Favorites

Recommend

New Products & Solutions

More>

Technical Resources

More>

All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.

Integrated Circuits