PF1550 Power management integrated circuit (PMIC) for low powerapplication processors Data sheet: advance information
The PF1550 is a power management integrated circuit (PMIC) designed specifically for use with i.MX processors on low-power portable, smart wearable and Internet-of-Things (IoT) applications. It is also capable of providing full power solution to i.MX 7ULP, i.MX 6SL, 6UL, 6ULL and 6SX processors.
With three high efficiency buck converter, three linear regulators, RTC supply, and battery linear charger, the PF1550 can provide power for a complete battery-powered system, including application processors, memory, and system peripherals.
Features and benefits:
This section summarizes the PF1550 features:
• Input voltage range to PMIC VBUSIN pin via USB bus or AC adapter: 4.1 V to 6.0 V
• Buck converters:
– SW1, 1.0 A; 0.6 V to 1.3875 V in 12.5 mV steps, or 1.1 V to 3.3 V in variable steps
– SW2, 1.0 A; 0.6 V to 1.3875 V in 12.5 mV steps, or 1.1 V to 3.3 V in variable steps
– SW3, 1.0 A; 1.8 V to 3.3 V in 100 mV steps
– Soft start
– Quiescent current 1.0 μA in ULP mode with light load
– Peak efficiency > 90 %
– Dynamic voltage scaling on SW1 and SW2
– Modes: forced PWM quasi-fixed frequency mode, adaptive variable-frequency mode
– Programmable output voltage, current limit and soft start
• LDO regulators
– LDO1, 0.75 to 1.5 V/1.8 to 3.3 V, 300 mA with load switch mode
– LDO2, 1.8 to 3.3 V, 400 mA
– LDO3, 0.75 to 1.5 V/1.8 to 3.3 V, 300 mA with load switch mode
– Quiescent current < 1.5 μA in Low-power mode
– Programmable output voltage
– Soft start and ramp
– Current limit protection
• Battery charger
– Supports single-cell Lithium Ion/Lithium Polymer batteries
– Linear charging (10 mA to 1500 mA input limit)
– Up to 6.5 V input operating range
– VSYS regulator can withstand transient and DC inputs from 0 V up to +22 V
– Programmable charge voltage (3.5 V to 4.44 V)
– Programmable charge current (100 mA to 1000 mA)
– Programmable charge termination current (5.0 mA to 50 mA)
– Integrated 50 mΩ battery isolation MOSFET for operation with no/low battery
– Battery supplement mode
– Battery discharge overcurrent protection, up to 3.0 A
– USB_PHY low dropout linear regulator
– Programmable LED driver (status indicator)
– JEITA compliant battery temp sensing and charger control
– Key charging parameters can be configured and permanently stored in OTP
– I²C Control Interface permitting processor control and event detection
• LDO/switch supply
– RTC supply VSNVS 3.0 V, 2.0 mA
– Battery backed memory including coin cell charger
• DDR memory reference voltage, VREFDDR, 0.5 to 0.9 V, 10 mA
• OTP (One time programmable) memory for device configuration
– User programmable start-up sequence, timing, soft-start and power-down sequence
– Programmable regulator output voltages and charger parameters
• I²C interface
• User programmable Standby, Sleep/Low-power, and Off (REGS_DISABLE) modes
• Ambient temperature range −40℃ to 105℃
|
PF1550 、 MC32PF1550A0EP 、 MC32PF1550A1EP 、 MC32PF1550A2EP 、 MC32PF1550A3EP 、 MC32PF1550A4EP 、 MC32PF1550A5EP 、 MC32PF1550A6EP 、 MC32PF1550A7EP 、 MC32PF1550A8EP 、 MC34PF1550A0EP 、 MC34PF1550A1EP 、 MC34PF1550A2EP 、 MC34PF1550A3EP 、 MC34PF1550A4EP 、 MC34PF1550A5EP 、 MC34PF1550A6EP 、 MC34PF1550A7EP 、 MC34PF1550A8EP |
|
|
[ low power application processors ][ low-power portable applications ][ smart wearable applications ][ Internet-of-Things applications ][ IoT applications ][ battery-powered system ][ application processors ][ memory ][ system peripherals ][ Smart mobile devices ][ Smart wearable devices ][ Low-power IoT applications ][ Wireless game controllers ][ Embedded monitoring systems ][ Home automation ][ POS ][ E-Read ] |
|
|
Datasheet |
|
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
|
40-pin QFN;QFN;98ASA00913D |
|
|
English Chinese Chinese and English Japanese |
|
|
28 September 2018 |
|
|
Rev. 4.0 |
|
|
PF1550;PF1550 v.4.0 |
|
|
3.9 MB |
- +1 Like
- Add to Favorites
Recommend
- Nxp Licenses Advanced TMR Sensor Technology From Crocus Technology
- Keysight, NXP Collaborate to Advance Development of 5G Fixed Wireless Access (FWA) Solutions Enables technology providers to verify CPE
- Ultra-Low IQ PMIC from ROHM Selected to Power NXP iMX8M Nano for High Performance Embedded Artists Industrial Control Board
- AEC-Q100 Qualified Clock Generator Adopted on NXP S32G Automotive Network Processor Reference Design
- Unleashing the Potential of i.MX 8M Mini in Industrial and Medical Applications
- The Pros and Cons of Different Filter Structures
- C-V2X Certification – Necessary or Just Nice to Have?
- Runic Technology Participates in the 2021 ASPENCORE Double Summit
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
