ASL1507SHN; ASL2507SHN Single-phase and two-phase boost converter with limp-home mode Product data sheet
●Introduction：
The ASL1507SHN is a highly integrated and flexible one-phase DC-to-DC boost converter IC. The IC has one integrated gate driver which can drive one external power metal-oxide-semiconductor field-effect transistor (MOSFET) and two integrated proportional-integral (PI) controllers which can regulate the output voltage. It has a serial peripheral interface (SPI) allowing control and diagnostic communication with an external microcontroller.
The ASL2507SHN is a highly integrated and flexible two-phase DC-to-DC boost converter IC. The IC has two integrated gate drivers which can drive two external power metal-oxide-semiconductor field-effect transistors (MOSFETs) and two integrated proportional-integral (PI) controllers which can regulate the output voltage on both channels. It has a serial peripheral interface (SPI) allowing control and diagnostic communication with an external microcontroller.
The ASL1507SHN: ASL25Q7SHN is designed primarily for use in automotive LED lighting applications and provides an optimized supply voltage for ASLx416/17SHN multichannel LED buck driver.
For simplicity, the data sheet states always ’gate drivers' and 'output voltages'. The ASL15Q7SHN has only one gate driver and can only drive one output.
●General description：
The ASL1507SHN: ASL25Q7SHN has a fixed frequency peak current mode control with parabolic/non-linear slope compensation. It can operate with input voltages from 5.5 V to 40 V. It can be configured in boost topology via SPI for output voltages of up to 80 V, to power the LED buck driver IC.
The ASL1507SHN is a single-phase boost converter with one output voltage. The ASL2507SHN is a two-phase boost converter, which can have two independent outputs. The ASL2507SHN is configurable via the SPI interface, as a single output converter with either one phase or two phases, or two independent output voltages. In case the SPI communication is lost in an abnormal situation, it switches to limp-home mode operation ensuring system safety.
The ASL15Q7SHN; ASL2507SHN boost converter can drive up to two external low-side N channel MOSFETs from an internally regulated adjustable supply. It can drive either logic or standard level MOSFETs.
The integrated SPI interface also allows for programming the supply under/overvoltage range, output voltage range, frequency spread spectrum, and DC-to-DC switching frequency. It enables the optimization of external components and flexibility for electromagnetic compatibility (EMC) design. This interface can be used also to provide diagnostic information such as the device temperature, battery voltage, VGG voltage, output voltage etc.
The ASL1507SHN: ASL2507SHN integrates a non-volatile memory (NVM) to save the default configuration internally. The configuration includes boost ramp-up; boost voltage, frequency setting, error detection and etc. The default configuration is used in limp-home mode (SPI fail) and autonomous mode (no MCU). Additional features include input undervoltage lockout and thermal shutdown when the junction temperature of the ASL1507SHN; ASL2507SHN exceeds Tsd(otp)-
The device is housed in a very small HVQFN32 package with an exposed thermal pad. It is designed to meet the stringent requirements of automotive applications. It is fully AEC-Q100 grade 1 qualified. It operates over the -40 °C to +125 °C ambient automotive temperature range.
|
[ Automotive LED lighting ][ Daytime running lights ][ Position or park light ][ Low beam ][ High beam ][ Turn indicator ][ Fog light ][ Cornering light ] |
|
|
Datasheet |
|
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
|
HVQFN32;SOT617-12;MO-220 |
|
|
English Chinese Chinese and English Japanese |
|
|
26 April 2018 |
|
|
Rev. 1 |
|
|
ASL1507_ASL2507 v.1;SL1507_ASL2507 |
|
|
1.6 MB |
- +1 Like
- Add to Favorites
Recommend
- ROHM Expands Its Miniature PICOLED™ Lineup: Power-Saving Infrared LED for VR/MR/AR Applications
- Nxp Licenses Advanced TMR Sensor Technology From Crocus Technology
- 24V TVS ASL12LB Has AEC-Q101 Qualified，and is Suited for Many Other Portable Applications
- ASB ASL122 ——a Flat Gain LNA To Be Suitable To GNSS Receiver Application
- SLKOR High-voltage MOSFET SL15N60CF: Excellent Performance and Wide Applications
- Keysight, NXP Collaborate to Advance Development of 5G Fixed Wireless Access (FWA) Solutions Enables technology providers to verify CPE
- Slkor SL15T120FL Contribute to the Fields of High-frequency Converters and Uninterruptible Power Supplies
- SL15N65CD: a Power MOSFET Produced Using Slkor‘s Advanced Superjunction MOSFET Technology
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
