Si7050/1/3/4/5-A20 I2C TEMPERATURE SENSORS
consumption and high accuracy across the entire operating voltage and
temperature range. These monolithic CMOS ICs feature a band-gap
temperature sensor element, an analog-to-digital converter with up to 14-
bit resolution, signal processing, calibration data, and an I2C interface.
The patented use of novel signal processing and analog design enables
the sensors to maintain their accuracy over a wide temperature and
voltage range, while consuming very little current.
The temperature sensors are factory-calibrated and the calibration data is
stored in the on-chip non-volatile memory. This ensures that the sensors
are fully interchangeable, with no recalibration or software changes
required.
The Si705x devices are available in a 3x3 mm DFN package, and the
industry-standard I2C interface can operate at up to 400 kHz. Requiring
just 195 nA of average current when sampled once per second, the
Si705x can operate for several years with just a single coin cell battery.
The Si705x devices offer an accurate, low-power, factory-calibrated
digital solution ideal for measuring temperature in applications ranging
from HVAC/R and asset tracking to industrial and consumer platforms.
Si7051 、 Si7053 、 Si7054 、 Si7055 、 Si7050 、 Si705x 、 CR0603-16W-103JT 、 C0603X7R160-104M 、 Si705x-A20-IM 、 Si7051-A20 、 Si7053-A20 、 Si7054-A20 、 Si7055-A20 、 Si7055-A20-ZM 、 Si7050-A20-IM 、 Si7050-A20-IMR 、 Si7051-A20-IM 、 Si7051-A20-IMR 、 Si7053-A20-IM 、 Si7053-A20-IMR 、 Si7054-A20-IM 、 Si7054-A20-IMR 、 Si7055-A20-IM 、 Si7055-A20-IMR 、 Si705X 、 Si7050-A20 |
|
[ HVAC/R ][ Thermostats ][ White goods ][ Computer equipment ][ Portable consumer devices ][ Asset tracking ][ Cold chain storage ][ Battery protection ][ Industrial controls ][ Medical equipment ] |
|
Datasheet |
|
ESD(CDM,1.25kV) 、 ESD(HBM,2kV) 、 ESD(MM,250V) 、 IPC-7351 |
|
Please see the document for details |
|
|
|
|
|
DFN |
|
English Chinese Chinese and English Japanese |
|
9/18 |
|
Rev. 1.15 |
|
|
|
1.2 MB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.