A Low-cost Serial WiFi Module with Complete Application SW on-chip Designed for Smart Home Gateway

2021-05-21 Skylab
Serial WiFi Module,Serial WiFi Module,WG219,WG219

The maturity of Bluetooth 4.2 technology has had a huge impact on various industries, especially the smart home industry.


SKYLAB WG219 Wi-Fi Module is a small form-factor, single-stream, 802.11b/g/n WiFi module with an onboard low power application processor. It is a low-cost Serial WiFi Module, supporting UART-WiFi – Ethernet data transmission. The Wi-Fi Module also enables rapid application development of ultra low power devices with the complete application SW on-chip. This combination makes the Wi-Fi Module an ideal solution for low power automation and sensor solutions because of its high efficiency and low power consumption.  Wi-Fi Module can be used to design applications using 802.11b/g/n communication protocols. All features are enhanced by a built-in antenna, external antenna connector, and an interface port to the carrier board. This interface port includes power supply pins, GPIO ports, and UART ports.



What Are Its Main Features?

◆ 802.11 b/g/n/e/i

◆ 802.11 n (2.4 GHz), up to 72.2 Mbps

◆ 802.11 e: QoS for wireless multimedia technology

◆ AT Set, Cloud Server, App

◆ A-MPDU and A-MSDU aggregation

◆ Network Protocols: IPv4, TCP/UDP/HTTP/FTP

◆ Fragmentation and defragmentation

◆ Automatic Beacon monitoring/scanning

◆ 802.11 i security features: pre-authentication and TSN

◆Wi-Fi Protected Access (WPA)/WPA2/WPA2-Enterprise/Wi-Fi Protected Setup (WPS)

 

As the Bluetooth module manufacturer Skylab Technology, It uses the Nordic nRF52840 chip, which has low power consumption and good stability.


  • +1 Like
  • Add to Favorites

Recommend

This document is provided by Sekorm Platform for VIP exclusive service. The copyright is owned by Sekorm. Without authorization, any medias, websites or individual are not allowed to reprint. When authorizing the reprint, the link of www.sekorm.com must be indicated.

Contact Us

Email: