NETWORK RECORDER iMC750,Frequency range from 16Hz to 400Hz,Class S (0.2%) accuracy in compliance with EN EN 61557-12
ISKRA‘s iMC750 NETWORK RECORDER is an essential device for permanent monitoring measuring and analyzing single-phase or three-phase electrical power networks.
The meter measures the TRMS value according to the principle of fast sampling of voltage and current signals. A built-in microprocessor calculates measurands (voltage, current, frequency, energy, power, power factor, THD phase angles, etc.) from the measured signals.
iMC750 performs measurements in compliance with regulatory requested standard EN 61557-12.
All required measurements and Alarms can also be stored locally in internal memory. With the RS232/RS485 or Ethernet/USB communication the meter can be set, measurements checked, and stored data downloaded.
iMC750 Network recorder is intended to monitor, measure and record electrical quantities of a three-phase electric-energy distribution system.
Identifying relevant fixed measuring points is the most important task prior to completing system installation. This system will not prevent network disturbances but will help diagnose their origin and effects. This is possible only with a system approach by using time-synchronized meters with a wide range of measuring parameters.
Features
-Measurements of instantaneous values of more than 140 quantities including harmonics, power line signaling voltage, unbalance, etc..
-Class S (0.2%) accuracy in compliance with EN EN 61557-12.
-Four quadrant energy measurement with class 0.5 S or 0.2 S for active energy (8 programmable energy counters, up to four tariffs, tariff clock, etc.).
-Automatic range selection of 3 current and 4 voltage channels (max. 12.5A and 1000VTRMS) with 32kHz sampling rate.
-Recording all measured parameters including all voltage and current harmonics up to 63rd, 32 adjustable Alarms, anomalies, and quality reports in the internal memory.
-Measurements of 40 minimal and maximal values in different time intervals (from 1 period to 256 periods).
-Frequency range from 16Hz to 400Hz.
-Up to three independent communication ports (RS232 or RS485 up to 115,200 bit/s, Ethernet, and USB 2.0).
-MODBUS and DNP3 communication protocols.
-Support for NTP real-time synchronization.
-Up to 4 inputs and outputs (analogue inputs/outputs, digital inputs/outputs, alarm/watchdog outputs, pulse input/outputs, tariff inputs).
-Multilingual support.
-Universal power supply.
-96mm square panel mounting.
-User-friendly setting and evaluation software, MiQen.
-Extension unit with four configurable analogue outputs – EX104 (0.4 mADC … 20 mADC, 0 VDC … 10 VDC).
- +1 Like
- Add to Favorites
Recommend
- The story of ISKRA low voltage switchgears
- Iskra Recognized Among the Best in ESG Development in Slovenia
- ISKRA Smart Energy Meters(WM3M4C)fully compliant with the German calibration law, known as Eichrecht!
- Iskra‘s Elka Took over a 50 Percent Ownership Stake in Elkakon
- Iskra and SuperFlink: Pioneering Electrotechnical Solutions for a Sustainable Future
- Iskra‘s Cooperation with Easelink on the eTaxi Austria Project
- Project completed - Iskra DZ9 Teleprotection equipment in operation at RTP 400/110 kV Cirkovce
- ISKRA Launches a new Power Quality Analyzer iMC784 used for utility purposesas well as for industrial purposes
This document is provided by Sekorm Platform for VIP exclusive service. The copyright is owned by Sekorm. Without authorization, any medias, websites or individual are not allowed to reprint. When authorizing the reprint, the link of www.sekorm.com must be indicated.