Easy-to-install ElastiSense DS20 sensors for bridge monitoring have won good comments from Virginia Department of Transportation
Once again, DS-Series sensors from ElastiSense, have proven valuable in terms of bridge monitoring, this time in Virginia. Specifically monitoring of bearings, offering valuable information about movement of the bridge. This helps predict maintenance and it helps the Virginia Department of Transportation (VDOT) estimate how many years of wear there is left in the bridge.
“The installation was a snap”was the first feedback from the customer, indicating that the ElastiSense solution has been a lot easier to install than previous solutions, if any.
VDOT have purchased twelve DS20 sensors to monitor the Rte. 638 Integral Bridge. The sensors are installed on four bearings of this bridge to monitor their displacement and rotation under loading conditions and temperature variations. This information is essential for understanding the characteristics of a bridge, predict maintenance, and estimate remaining life of the bridge.
The sensors were connected to wireless dataloggers from Campbell Scientific and the data was wirelessly transferred to a cloud system which is then accessed by structural experts at VDOT.
Being waterproof (IP68) and tolerant to misalignments, ElastiSense DS-Series sensors are inherently suitable for instrumentation and monitoring of structures such as bridges, tunnels, buildings, dams, rock cliffs, railways, etc.
- +1 Like
- Add to Favorites
Recommend
- ElastiSense launched NEW 2.0 VERSION OF THE DS-SERIES DISPLACEMENT SENSOR
- Displacement sensors from ElastiSense are perfect for most applications within SHM
- ElastiSense provides Sensors for Factory Automation,which is precise and mechanically flexible
- ElastiSense provides Sensors for off-Road and off-highway vehicles
- ElastiSense‘s Partnership with Smart Sensor Systems from Norway Offering the State-of-the-art Data Logger, iBridge
- Bridge Monitoring in Greece Used Six Elastisense Sensor Technology DS Displacement Sensors
- DS Sensors from Elastisense Sensor Technology Are Used to Monitor Longitudinal Expansion and Tilt/angel of The Bridge
- The DS-Series Displacement sensors from ElastiSense are developed especially for bridge, adding safety and reducing costs
This document is provided by Sekorm Platform for VIP exclusive service. The copyright is owned by Sekorm. Without authorization, any medias, websites or individual are not allowed to reprint. When authorizing the reprint, the link of www.sekorm.com must be indicated.