EDS Series Displacement Sensors – Installation and Operation Manual
●An ElastiSense EDS sensor may either be used as a standalone unit or as a part of a system together with other daisy chained sensors, which are controlled over a full duplex RS485 bus. The instruction provided here is limited to installation and operation of the sensor as a standalone unit.
●When operated as standalone displacement sensor, the EDS requires a 24VDC supply and outputs an analogue current in the range of 4-20mA. The signal is linearly proportional to the displacement i.e. 4mA corresponds to 0mm and 20mA represents the maximum displacement of the sensor.
●The sensor output can be customized to provide a voltage signal or a digital signal via RS485.
|
EDS 、 EDS Series 、 EDS20 、 EDS50 、 EDS100 |
|
|
|
|
|
User's Guide |
|
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
|
2019/2/13 |
|
|
rev 3 |
|
|
001E5001 |
|
|
314 KB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
