A Low Profile 2000V Bridge Rectifier In SMD Package, with an Average Forward Current Rating of 1.6A/2.0A

PublishTime： 2021-03-21 Article Source：Diotec

Today's modern high power density electronics are more vulnerable to electrical stresses than ever due to the component miniaturization. High demand scalable electronics such as LED Street Lamps require high reliable circuit protection. These devices are connected directly to the land line, where lightning strikes are a permanent source for excessive voltage surges. It requires a bridge rectifier with high safety margin and also slim package outline to fit into the compact electronics.

DIOTEC's ABS15Y is a low profile, high power, standard bridge rectifier. It offers an impressive reverse voltage of 2000V, an average forward current rating of 1.6A/2.0A (depending on pad size). It comes in an ABS package with only a height of just 1.4mm. Thus they can be assembled on the bottom side of the PCB, where space is usually restricted. They are well suited for input rectification for applications like high voltage power supplies, LED Street Lighting Systems, 4G/5G Base Stations, Smart Meters and so on.

Features:

· Repetitive peak reverse voltage of 2000V

· Average Forward current of 1.6A/2.0A

· Ultra-low profile ABS package

· Just 1.4mm of device height

· High creepage and clearance

Typical Applications:

· LED Street Lighting Systems

· 4G/5G Base Stations

· HV Power Supplies

· Smart Meters

+1 Like
Add to Favorites

Recommend

Technical Resources

More>

New Products & Solutions

More>

This document is provided by Sekorm Platform for VIP exclusive service. The copyright is owned by Sekorm. Without authorization, any medias, websites or individual are not allowed to reprint. When authorizing the reprint, the link of www.sekorm.com must be indicated.

Integrated Circuits