Stay Powered on the Go: Protected USB Port on the Motorcycle with the LDP01-28AYD2-AQ from Diotec

2024-04-10 DIOTEC News
Load Dump Protector,LDP01-28AYD2-AQ,DIOTEC

As spring arrives and the days get longer, many motorcyclists take their motorcycle out of storage and hit the road. A smartphone is a must-have accessory, as there are apps available to help bikers navigate, find the best and cheapest fuel stops, and provide weather information for the route. Even in the event of an accident, they can send an emergency call with location information to the nearest rescue coordination center and eliminate the need to search for an SOS emergency call center, which is unfortunately too far away in most cases.


On longer journeys, the smartphone battery may run out at some point. You can easily charge your smartphone using the USB port in the cockpit. Like all electronics in a vehicle, it must be protected against load-dump events. These are voltage peaks on the board mains, occurring typically in the case of a jump start. When the supplying battery is disconnected under load, the jumper cables act like an ignition coil. Here, the Load Dump Protector LDP01-28AYD2-AQ by DIOTEC Semiconductor comes into play. According to ISO 16750-2 load dump curves, it offers protection and clamps its peaks to safe levels. The device is fully AEC-Q101 qualified and comes in the powerful D²PAK case outline.



  • +1 Like
  • Add to Favorites

Recommend

This document is provided by Sekorm Platform for VIP exclusive service. The copyright is owned by Sekorm. Without authorization, any medias, websites or individual are not allowed to reprint. When authorizing the reprint, the link of www.sekorm.com must be indicated.

Contact Us

Email: