Standex-Meder Standard MK02: Ferromagnetic Sensor for Print Assembly

2023-09-04 Standex-Meder News
Ferromagnetic Sensor,proximity switch,Sensor,MK02

Conventional reed sensors must be actuated by a magnet, which has to be separately mounted from the sensor. This proximity switch responds to any magnetically conductive material. When a piece of iron approaches from the above, the sensor switch on at a distance from 3,5 to 5,5mm.

As its repeat accuracy and hysteresis are unique, the MK02 Ferromagnetic Sensor series by MEDER Electronic is an alternative to those costly inductive sensors or to micro-switches.


Standard MK02 sensors are delivered with a NO or an NC contact. The switching performance can be achieved up to 10W by a maximum of 170VDC, respectively 0.5A.


For applications without printed circuit board (PCB), different cable versions will be offered. MK02 sensor with a 4-wire round cable is the right and proper choice for alarm technique applications; thus, a sabotage loop is already available.MK02 sensor is used in Print Assembly.


Apart from applications in industry, for instance, monitoring in plant construction and vehicle manufacturing, or end-position detection; the MK02 sensors are especially suitable for applications in alarm technique and for monitoring of fire doors.


  • +1 Like
  • Add to Favorites

Recommend

This document is provided by Sekorm Platform for VIP exclusive service. The copyright is owned by Sekorm. Without authorization, any medias, websites or individual are not allowed to reprint. When authorizing the reprint, the link of www.sekorm.com must be indicated.

Contact Us

Email: