Renesas‘ Rapid Charge™ Controllers Prevent Fast Charger Hacking Back to Top
Recent news stories report that some fast chargers designed with MCUs can be easily hacked. When users connect their devices to these fast chargers via the USB cable, hackers may be able to compromise the charger by sourcing more power than the device can safely handle, damaging or even destroying the device. Hackers can alter the firmware of fast charge devices in order to deliver extra voltage and damage connected equipment.
Designers can try to add more code in the MCU to prevent hacker modifications, but only if the MCU has the option to be updated. Or, they can try to add overload protections in the devices for which the chargers are designed. These methods are hardly ideal.
Hard-Wired State Machine Approach
A simpler and lower cost approach is to design fast chargers and power supplies without MCUs and firmware, and instead use a hard-wired state machine approach.
Fast chargers and power supplies designed with Renesas' Rapid Charge™ controllers cannot be hacked, because they are hard-wired state machines, so there is no firmware that can be accessed and corrupted. And, with a hard-wired state machine, you won’t need to spend extra time and expense to harden firmware or add overload protections.
All of Renesas' Rapid Charge™ controllers are hard-wired state machines.
- +1 Like
- Add to Favorites
Recommend
- 710V/96A N-Channel Super Junction Power MOSFET NCE65NF023T with Ultra-Low RDS(ON), Low Gate Charge and A Rapid Recovery Body Diode
- Single Cell Battery Linear Charger with Maximum 1000mA Programmable Charge Current and 10% Charge Current Accuracy
- Eaton and Charge Enterprises Target U.S. Fleets to Accelerate Infrastructure for Electric Vehicle Charging
- New Releases: Grepow Gens ace iMars S100 G-Tech AC Balance Smart Charger With a 10A Charge Rate and 100W of Power
- Grepow‘s NMC 532 Fast Charge Battery Increases Charging Speed By 60%
- Chroma 17040/17040E Regenerative Battery Pack Test Systems Provide 1700V Charge and Discharge Capability, Suitable for Energy Storage System Applications
- TOP POWER ASIC Introduces TP4065 Linear Li-lon Battery Charger with Charge Current Ranging From 3mA to 600mA
- TP4067 3mA-600mA Linear Li-lon Battery Charger from TOP POWER ASIC Features Preset Charge Voltage with 1% Accuracy
This document is provided by Sekorm Platform for VIP exclusive service. The copyright is owned by Sekorm. Without authorization, any medias, websites or individual are not allowed to reprint. When authorizing the reprint, the link of www.sekorm.com must be indicated.