TFSeries Lidar That Can Be Used as Fall Detection Sensor of the Robot

2021-08-05 Benewake
LiDAR Module,LiDAR Module,TF-Luna,TFmini Plus

In the process of moving, the robot may encounter the situation that the road surface has downward steps or the ground sag. If the robot can't sense them and take action, it risks falling.



As a range sensor, TF series lidar has a small size, high accuracy, and high frequency, which can be used as a fall detection sensor of the robot. Lidar can detect the distance information in real-time and send it to the robot so that the robot can make timely braking, deceleration, turning and other responses to avoid falling on steps or depressions.




Features & Benefits:
Small size, easy to be embedded into the robot
High frequency, can adapt to various running speeds
High-ranging performance, high energy redundancy, can adapt to various installation angles
Low cost, a variety of models available
UART, IIC, and IO interfaces are available

Applications:
The TF series lidar mounted on the robot detects the distance information under the slant in real-time at a certain angle. When the road surface is flat, the ranging value will be stable in a certain range; When the road surface is abnormal, the ranging value will exceed the reasonable range and the distance will change suddenly. It can be judged that there are steps or depressions ahead. At this time, the robot should slow down or turn to prevent falling.


Related product

TF-Luna


TFmini-S 


TFmini Plus 

  • +1 Like
  • Add to Favorites

Recommend

This document is provided by Sekorm Platform for VIP exclusive service. The copyright is owned by Sekorm. Without authorization, any medias, websites or individual are not allowed to reprint. When authorizing the reprint, the link of www.sekorm.com must be indicated.

Contact Us

Email: