How 5G Industrial Router Helps Intelligent AVG Car Application Scenario
AVG car is an autonomous navigation car, which can achieve real-time high-speed data transmission, stable network connection, and low-latency response speed by using a 5G industrial router, thus improving the performance and reliability of AVG car. The following are the steps to realize AVG car application based on a 5G industrial router:
Choosing the right 5G industrial router should take into account the special requirements of AVG car applications, such as high-speed data transmission, low latency, and so on. Generally speaking, 5G industrial routers should have high reliability, high performance, and rich interfaces.
Connect the 5G network to connect the 5G industrial router to the 5G network, which can be connected by SIM card or other means. The high-speed, low-latency and large-bandwidth characteristics of the 5G network provide a good network environment for AVG car applications.
Configure 5G industrial routers according to actual needs, including network parameters, security policies, traffic control, etc.
Connect the AVG car to the 5G industrial router, which can be wired or wireless. After connection, remote control, data transmission, and other operations can be carried out on the AVG car through the router.
Monitoring and maintenance Monitoring and maintenance are very important in AVG car applications. Through the network management function provided by the 5G industrial router, the remote monitoring and maintenance of AVG cars can be realized, and work efficiency and safety can be improved. In a word, to realize the application of an AVG car based on a 5G industrial router, it is necessary to select a suitable industrial router, connect the 5G cellular network, configure the industrial router, connect the AVG car, and monitor and maintain it.
In the practical application of AVG, the AGV car is integrated with radar, sensors, video display, and other equipment, through which road, pedestrian, environment, and other information are collected, and the information is uploaded to the background server in time through the 5G industrial router. The 5G industrial router is connected to the camera, radar, and other equipment through the network port, and connected to the background server through the 5G network using the VPN protocol so that the background server can ping the on-site camera IP to achieve the purpose of network interoperability and data interoperability. Car positioning uses the Qianxun service, which can locate line information faster and more accurately. So that the vehicle can be driven on a preset or automatically selected road.
Features of 5G communication technology:
1. high speed, high peak rate, to meet high-definition video, virtual reality, and other large data transmission.
2. The efficiency of spectrum utilization will be improved. In 5G, the spectrum resources of the high-frequency band will be widely used, and its application efficiency will be greatly improved.
3. Low delay and high reliability. Compared with 4G mobile communication, the reliability of 5G far exceeds that of 4G, and the delay can be as low as 1ms.
4. Extensive connection, with equipment connection capacity of millions of connections per square kilometer.
5. Advanced technologies such as waveform and multiple access based on OFDM optimization, flexible frame design, and new wireless technology are adopted.
Features of Manned 5G Industrial Router
USR-G817 is a 5G + WIFI 6 industrial router with high speed, wide connection, low delay, and high stability.
It supports independent networking (SA) and non-independent networking (NSA), as well as the four major operators of China Mobile, China Telecom, China Unicom, and China Radio and Television.
The measured speed of 5G is up to 700Mbps.
The measured speed of WIFI6 is more than 700Mbps, and it can actually carry more than 60 WIFI clients.
Integrated WIFI6 technology (supporting AP + STA/AP + trunking), dual SIM card slots, 1 * RS232/RS485, Ethernet port (3 LAN + 1 WAN/LAN)
It can be equipped with built-in eSIM, PoE power supply, GNSS positioning, and other functions.
It can provide stable and reliable networking solutions for different scenarios and industries.
The product adopts an industrial standard, wide temperature and wide voltage, strong hardware protection, and has passed a number of rigorous environmental tests.
With 1 * RS232/1 * RS485 serial port, support MODBUS, MQTT, TCP, UDP, and other transmission protocols;
Built-in hardware and software dual watchdog, fault self-recovery, and other mechanisms;
It can adapt to different industry scenarios and operate steadily and reliably in harsh environments.
- +1 Like
- Add to Favorites
Recommend
- How to Choose a Cost-effective Ethernet to RS485 Converter?
- Why Is a 5G Cellular Router Faster Than a 2.4G Router ?
- Main Features of Edge Computing Gateway
- 5G CPE Configuration Webpage: Revolution and Solutions for Traditional Industries
- The Use of the Serial to Ethernet Converter in the Laser Cutting Machine Remote Monitoring System
- Does A Gigabit IOT Router Refer to Network Speed Or Broadband?
- 5G LTE Router Purchase Tips in The 5G Era: Speed, Coverage and Compatibility
- IP Address Setting of Serial to Ethernet Adapter
This document is provided by Sekorm Platform for VIP exclusive service. The copyright is owned by Sekorm. Without authorization, any medias, websites or individual are not allowed to reprint. When authorizing the reprint, the link of www.sekorm.com must be indicated.