Alliance Memory 5V Parallel NOR Flash Memory Solutions Offer Fast 55ns Access Times and Densities from 1M to 16M
SAN CARLOS, Calif. —Sept. 12, 2019 — Alliance Memory announced that the company has bolstered its product offering with a line of 5V Parallel NOR Flash Memory products in boot and uniform sectored architectures. Available in densities from 1M to 16M, the devices offer access times of 55ns to enable fast, low-latency read speeds, allowing for both direct code execution and data storage in a single memory product.
Offering reliable, long-term performance for embedded systems, the NOR Flash devices released today feature a minimum of 100,000 program/erase cycles per sector and offer 20-year data retention at +125℃. With their fast boot times, the solutions are ideal for high-performance applications such as digital still cameras (DSC and DSLR), in addition to process-intensive networking routers and process-intensive networking switches, home gateways, set-top boxes (STBs), automotive infotainment systems, industrial robotics, and medical electronics.
The devices’ flexible sector architectures allow any combination of sectors to be erased and reprogrammed without affecting the content of other sectors — ensured by a hardware protection feature that prevents inadvertent program or erase operations. An Embedded Program algorithm automatically writes and verifies bytes at specified addresses, while an Embedded Erase algorithm automatically erases and verifies the entire chip or designated sectors.
The products operate over an industrial temperature range of -40℃ to +85℃ and offer 20mA typical active read currents and 30mA typical program/erase currents. In standby mode, power consumption is reduced to as low as 1μA. Uniform sector devices are available in the 32-pin PLCC package, while boot devices — in top or bottom block configurations — are available in the 48-pin TSOP I package. Each part can also be programmed in standard EPROM programmers. All devices are lead (Pb)-free and RoHS 2.0 compliant.
Device Specification Table:
Samples of the 5V parallel NOR Flash memory products are available now.
- +1 Like
- Add to Favorites
Recommend
- Alliance Memory Announces ISO 9001:2015 Recertification
- 5V Parallel NOR Flash from Alliance Memory was Available in Densities from 1M to 16M and Offer Access Times of 55ns
- Alliance Memory Introduces New Line of 1.8V and 3V SPI NAND Flash Memory Solutions
- Alliance Complete Automotive Temperature DRAM Portfolio, Now With Reduced Lead Times
- Alliance rounds out DDR4 SDRAM Lineup with six new 4Gb “A” die devices, which offer lower +1.2V operating voltages and higher speeds to 1600MHz in 96 and 78-Ball FBGA packages
- Alliance Memory Now Offering Micron Parallel and Serial NOR Flash Products
- Alliance Announces a New Line Of 3V Multiple Input/Output Serial NOR Flash Memory Products
- Alliance Memory Offered Discontinued Cypress Semiconductor CY62256 Low Power SRAMs With Original Part Numbers Into 2019
This document is provided by Sekorm Platform for VIP exclusive service. The copyright is owned by Sekorm. Without authorization, any medias, websites or individual are not allowed to reprint. When authorizing the reprint, the link of www.sekorm.com must be indicated.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
