Crocus Technology Unveiled Industry-Leading TMR-based Angular Sensor CT300 with an Angular Error Well Below 0.5°
The CT300 TMR-based Angular Sensor is a 2D magnetic sensor with an angular error well below 0.5°.
Santa Clara, California, November 6, 2018 – Crocus Technology Inc., a leading supplier of disruptive TMR sensors, announced the CT300 device, a new break-through TMR-based angular (2D) magnetic sensor with an extremely low angular error and high stability over a wide temperature and voltage ranges to address a variety of markets.
The CT300 is designed using Crocus’s revolutionary Magnetic Logic Unit™ (MLU™) technology and consists of two full-bridge magnetic resistor networks capable of two-dimensional sensing. In the presence of a rotating magnetic field, the CT300 senses the field and produces two sets of differential signals representing the sine (SIN) and cosine (COS) waveforms. Once the differential signals of the CT300 are processed and compensated, the resulting angular error will be at or below 0.5° over a temperature range of -40℃ to +150℃. A single CT300 can measure the absolute angle resulting from a full 360° rotation and can sense magnetic fields ranging from 20mT to 80mT.
“The CT300 is a high-performance TMR angular position sensor that showcases the strength of our MLU technology. It will help our customers achieve both higher accuracy measurements and stable performance over the operating range of temperatures and fields for applications that require a precise angular position, rotation direction, and speed information” states Zack Deiri, CSMO and GM of Sensor Products at Crocus Technology. “The CT300 exceeds the performance metrics of competing solutions in terms of angular error combined with very low noise, high-frequency response, and low power consumption which makes the device ideal for, but not limited to, battery operated consumer hand-held devices and IoT applications.”
The CT300 addresses the demands of the consumer, industrial, medical, and automotive markets and is highly suited for applications such as OIS- enabled camera modules, AF- enabled camera modules, optical encoders, BLDC motor control, IoT-enabled smart devices and appliances, automation equipment, industrial controls and robotics where precise angular position measurements are required.
CT300 is available in wafer/KGD (Known-Good-Die), an 8-lead TSSOP package, and in an ultra-low profile and small form factor 8-lead DFN package. Samples has been available in December 2018 and fully qualified for production in the first quarter (Q1) of 2019.
- +1 Like
- Add to Favorites
Recommend
- Crocus Technology Introduced its Second Generation XtremeSense™ TMR 2D Angular Sensor CT310
- Nxp Licenses Advanced TMR Sensor Technology From Crocus Technology
- US Patent and Trademark Office rules in favor of Crocus Technology in patent invalidation case
- Crocus Technology Acquired by Allegro MicroSystems to Accelerate Innovation in TMR Sensing Technology
- Crocus Technology and TowerJazz Qualified CTSX Magnetic Sensors and Volume Manufacturing Launched
- Crocus Technology’s new line of contactless current sensors with a signal-to-noise ratio as high as 77 dB
- Crocus Technology Launches First True Z-axis TMR Sensor Delivering Unparalleled Performance for Next-Gen Position and Current Sensing Applications
- Crocus Technology Launched CT452/3 1MHz Bandwidth Contactless Current Sensor with Common Mode Field Rejection and ＜1% Total Error
This document is provided by Sekorm Platform for VIP exclusive service. The copyright is owned by Sekorm. Without authorization, any medias, websites or individual are not allowed to reprint. When authorizing the reprint, the link of www.sekorm.com must be indicated.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
