New: The WireView Pro GPU

2024-10-13 thermal grizzly Official Website
WireView Pro GPU,thermal grizzly

The WireView Pro GPU was developed in collaboration with Jon "elmor" Sandström, a renowned hardware R&D engineer, extreme overclocker, and founder of Elmor Labs, to introduce new functionalities. To better protect the graphics card from potential damage, the Pro version of the WireView includes sensor pin detection that recognizes whether the 12VHPWR power connector is correctly plugged into the power supply.


Another new feature is the temperature sensors on the PCB of the WireView Pro GPU, which measure the temperature at the power connectors. Users can set a threshold via the WireView Pro GPU, which triggers an acoustic alarm when exceeded. Additionally, an alarm can be set to trigger when a defined current level is exceeded. The WireView Pro GPU also includes two additional temperature sensors that can be connected to monitor, for example, the temperature of the graphics card’s memory or voltage regulators. 


Features of the new WireView Pro GPU at a glance:

OLED display

Power consumption measurement

Power usage recording

New: Temperature sensors at power connectors

New: External temperature sensors

New: Sensor pin detection

New: Alarm function 

Optimized cable management

More information can be found on the product page.


WireView GPU Pro

The WireView Pro GPU is a device for measuring the power consumption of graphics cards. As a Pro version, it is also equipped with connector detection, temperature sensors, and an audible alarm. The measured data is displayed on an OLED screen.

  • +1 Like
  • Add to Favorites

Recommend

This document is provided by Sekorm Platform for VIP exclusive service. The copyright is owned by Sekorm. Without authorization, any medias, websites or individual are not allowed to reprint. When authorizing the reprint, the link of www.sekorm.com must be indicated.

Contact Us

Email: