Bike Light Battery Solution - Grepow GRP8024037 3.7V 600mAh Lithium Battery
UL listed factory direct production
Standard: GB31241-2014
Electric Feature: short circuit protection, overcharge protection, over-discharge protection, over-current protection, etc.
Bike Light Battery Product Parameter
Model: GRP8024037
Nominal Voltage: 3.7V
Nominal Capacity: 600mAh
Overcharge detection voltage: 4.28±0.05V
Overcharge release voltage: 4.08±0.05V
Over-discharge detection voltage: 3±0.1V
Over-current detection current: 3-5A
Cycle: >500 cycles
The bike light design solution
Protection Board (PMC): It is mainly a protection circuit designed for the rechargeable lithium battery pack. Due to the chemical characteristics of the lithium battery itself, it is necessary to provide protection functions such as intelligent power calculation, overcharge, over-discharge, short circuit, overcurrent, etc., to avoid burning, explosion, and other dangers. Internal resistance: ≤70mΩ
Protect IC: The main protection function chip of the backup power supply design scheme, which constantly monitors the online function of the battery cell, so that the battery cell works in a safe, stable, and efficient range.
Temperature Switches: Mainly designed for temperature protection function. When the temperature of the battery itself reaches the range of 60±5℃ due to other abnormal problems, the temperature switch is activated to perform temperature protection.
MOSFET: MOSFET, which acts as a switch in the protection circuit, always keeps the voltage at both ends of the load from increasing or decreasing, ensuring voltage stability.
Precautions
The lithium battery needs to be charged with 15% remaining. Don’t run out of it. The storage capacity of the used up battery will be greatly reduced next time. This is to be very careful; if it is not used for a long time, it is recommended to charge it once a month for storage. This does not affect the life of the battery.
Remark
No memory effect during charge and discharge. The battery can be customized according to customer requirements. Users should have basic knowledge of rechargeable lithium batteries, charging, discharging, and assembly before use.
- +1 Like
- Add to Favorites
Recommend
- What is a Smart Ring Battery and The Manufacturing Process?
- 12V UPS Battery FAQs
- Can Lithium Batteries and Lead Acid Batteries be Used Together?
- What Is LiFePO4 Battery and Why Use It?
- Grepow Battery will exhibit at 2022 Summer Asia Smart Wearable Exhibition
- Thin Film Lithium-ion Battery Vs Lithium-ion Battery: What’s the Difference?
- Grepow covers a wide range of shaped batteries to maximize the use of product space, perfectly adapted to small portable electronic products
- Small LiPo Batteries: from Types to Applications
This document is provided by Sekorm Platform for VIP exclusive service. The copyright is owned by Sekorm. Without authorization, any medias, websites or individual are not allowed to reprint. When authorizing the reprint, the link of www.sekorm.com must be indicated.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
