Kendeil New Super-High Energy Screw Type K29 Capacitor
Kendeil is proud to announce the development of a new super-high energy density capacitor screw series at 85°C.
Whenever there is the need to store huge electrical energy quantities to be delivered in a short amount of time capacitor banks are a must.
In applications such as DC filters, converters, uninterruptible power supplies, extremely bulky capacitor banks are built to fulfill the necessity of such energy transfers.
Kendeil just developed a new high voltage/capacitance series characterized by an extremely high energy density: this upgrade not only increases the capacitance but also the rated voltage.
The energy increase is linked to the internal potential content of a capacitor, which depends linearly by the capacitance value and by the DC squared voltage (as expressed by).
Applications: Designed for industrial / research applications such as DC resonant filters, converters, energy storage systems, high power UPS, electromagnetics systems power supplies.
Main electrical improvements: Rated capacitance values mean increase of +20% with respect to our actual high density energy series (K11). Capacitance values from 22000µF to 41000µF @350V, from 19000µF to 33000µF @400V, from 17000µF to 30000µF @450V and from 11000µF to 23000µF @500V. Energy content up to 2500J @350V, up to 2600J @400V, up to 3000J @450V and up to 2900J @500V.
Main features: Surge-proof capacitor in aluminum can with insulation sleeve and integrated safety vent in a reinforced lid. To be mounted with ring clips or with threaded stud. Super high density capacitance ratings for high voltage applications. Highest energy storage among all the series.
- +1 Like
- Add to Favorites
Recommend
- Kendeil Develops New Electrolytic Modular Solution K1M and K2M
- Kendeil Launched Compact Screw-type Electrolytic Capacitors K93 and K94 with Low ESR
- Kendeil Presented the DC link Film Capacitors K37 with Capcitance of 260 to 600μF
- Kendeil Announced Two Families of Snap-in Type Capacitors K25 and K26 at 500VDC, Low ESR and High Ripple Current
- Kendeil Announced Incredible Modular Electrolytic Capacitors K1M and K2M with 40% Higher Ripple Current
- Kendeil Presented the Screw Terminal Type Capacitors K91 and K92, Featuring a Rated Voltage of 500VDC
- Kendeil’s Two Snap-in Type Capacitors K85 and K95 Feature Extreme Miniaturization, Low ESR and High Ripple Current
- Kendeil Announced DC Link Power Film Capacitors K36 Type for Demanding Industrial Applications
This document is provided by Sekorm Platform for VIP exclusive service. The copyright is owned by Sekorm. Without authorization, any medias, websites or individual are not allowed to reprint. When authorizing the reprint, the link of www.sekorm.com must be indicated.