How to Choose a Good Solenoid Valve?
First, Selection based on
solenoid valve selection should first follow the four principles of safety, reliability, applicability, and economy, followed by six aspects of the field conditions (namely, pipeline parameters, fluid parameters, pressure parameters, electrical parameters, mode of action, and special requirements).
1. Select the solenoid valve according to the pipeline parameters: size specification (DN), interface mode
1. Determine the diameter (DN) of the pipeline according to the requirements of internal diameter or flow rate on site.
2. Interface mode, general & GT;DN50 to choose flange interface, ≤DN50 can be free to choose according to user needs.
Two, according to the fluid parameters to choose the solenoid valve: material, temperature group
1. Corrosive fluid: corrosion resistant solenoid valve and all stainless steel should be selected; Super clean fluid: food grade stainless steel solenoid valve should be selected.
2, high-temperature fluid: to choose the use of high-temperature electrical materials and sealing materials manufactured solenoid valve, and to choose the type of piston structure.
3. Liquid state: large to gaseous, liquid, or mixed state, especially when the diameter is larger than DN25, it must be distinguished.
4, fluid viscosity: usually below 50cSt can be arbitrarily selected, if more than this value, to choose a high viscosity solenoid valve.
Three, according to the pressure parameters to choose the solenoid valve: principle and structure varieties
1, nominal pressure: this parameter and other common valves have the same meaning, it is based on the nominal pressure to determine the pipeline.
2. Working pressure: if the working pressure is low, the principle of direct-acting or step-by-step direct-acting must be adopted; When the minimum working pressure difference is above 0.04mpa, direct acting, step by step direct acting, pilot type can be selected.
Iv. Electrical selection
It is convenient to give priority to AC220V and DC24 for voltage specification.
- +1 Like
- Add to Favorites
Recommend
- Nidec Develops Industry-first Solenoid Valve for Blow-by Gas Leak Diagnosis
- Solar Solenoid Valve FPD360F6 from MEISHUO with Rated Volatgeof DC 12V, 24V, 36V, Small Power and Light Appearance
- MEISHUO Plastic Solenoid Water Valve FPD360R with the Pressure Range of 0.02~0.8MPa and Operate Life ≥100000 OPS
- Melexis Releases the Magnetic Position Sensor of the Future, handling 360° rotary automotive applications with strong stray field immunity (SFI)
- Enhancement Power MOSFET Integrating Two P-channel Enhancement Mosfet Transistor
- Wifi Module MT7628: How to Use Step by Step Guide?
- Nidec Develops New Clutch Control Module for HEVs, 35% Lighter Than Existing Products
- MEISHUO High Power Electromagnetic Relay MLQ-100-209-B-L1 with a Max. Switching Voltage of 250VAC
This document is provided by Sekorm Platform for VIP exclusive service. The copyright is owned by Sekorm. Without authorization, any medias, websites or individual are not allowed to reprint. When authorizing the reprint, the link of www.sekorm.com must be indicated.