TFT LCD Display LCD Interface Type Comparison

2024-03-31 ALL VISION LCD News
TFT LCD display,ALL VISION LCD

At present, there are several mainstream interface methods of TFT LCD display: MCU interface, RGB interface, SPI interface, MIPI interface, QSPI interface, LVDS interface.


There are more applications are MCU interface and RGB interface and SPI interface, mainly the following differences:


MCU interface: will decode commands, timing generator to generate timing signals, drive COM and SEG drive.


RGB interface: When writing LCD register settings, there is no difference with the MCU interface. The difference is only in how the image is written.


SPI interface: SPI (Serial Peripheral Interfacce), serial peripheral interface, is a synchronous serial data transmission standard proposed by MOTOROLA.


The SPI interface is often referred to as a 4-wire serial bus, or it can also be a 3-wire SPI interface, which works in a master/slave mode, and the data transfer process is initialized by the master.


SPI CLK, SCLK: Serial clock, used for synchronous data transfer, output by the host


CS: Chip select line, active low, output by the host


MOSI: master output, slave input data line


MISO: Master input, slave output data line


There is no so-called best or worst between interfaces, only suitable and unsuitable applications for the product; Therefore, we organize the data to provide the following table, for the various interfaces introduced in this article, to provide a multi-faceted advantages and disadvantages analysis, so that you can analyze and compare to find out the most suitable display interface for your products.



  • +1 Like
  • Add to Favorites

Recommend

This document is provided by Sekorm Platform for VIP exclusive service. The copyright is owned by Sekorm. Without authorization, any medias, websites or individual are not allowed to reprint. When authorizing the reprint, the link of www.sekorm.com must be indicated.

Contact Us

Email: