Globally Leading ±15-kV IEC ESD Capability! 3PEAK‘s Full Family of Auto-Grade LIN Transceivers: TPT1021Q, TPT1022Q, and TPT1024Q
3PEAK (Stock Code: 688536), a semiconductor company focused on high-performance analog chips and embedded processors, announces the release of the TPT102xQ Series of Auto-Grade LIN Transceivers (TPT1021Q, TPT1022Q, and TPT1024Q). These products comply with ISO/DIS 17987-4, SAE J2602, and LIN2.x physical layer standards, making them suitable for automotive applications such as body control, lighting, chassis control, infotainment, and ADAS.
LIN Overview
Local Interconnect Network (LIN) is a low-cost serial communication network defined for distributed electronic systems in vehicles used to control such systems. LIN complements other automotive multiplex networks like Controller Area Networks (CAN) for applications with moderate requirements for bandwidth, performance, or fault tolerance.
By creating a basic serial network between actuators, sensors, switches, and ECUs, LIN significantly reduces design costs for automakers, with typical applications to be found in lighting, doors, windows, power seats, air conditioning, and sensors.
TPT102xQ Series Introduction
TPT102xQ Series LIN transceivers meet ISO 17987-4, SAE J2602, and LIN2.0, LIN2.1, LIN2.2, and LIN2.2A physical layer standards, and support data speeds of up to 20 kbps.
These transceivers feature a wide power supply input range, ultra-low power standby and sleep modes, ±45-V bus fault tolerance on the LIN bus side, support for LIN bus wake-up and local wake-up via pin control, and the INH pin on the TPT1021Q can control an external power supply to facilitate system-level power reduction.
The TPT102xQ Series of LIN transceivers offers comprehensive protection features with IEC ESD protection of ±8 kV, while the IEC ESD protection of the TPT1021Q is ±15 kV to enhance the reliability and robustness of the system and network.
The TPT1021Q, TPT1022Q, and TPT1024Q support single, dual, and quad LIN bus communication, respectively.
The TPT1022Q and TPT1024Q deliver dual and quad LIN in a compact package, reducing the board footprint required for system applications and allowing smaller system design.
3PEAK TPT1021Q Performance Comparison with Competitors
TPT102xQ Series Advantages
1: TPT1021Q IEC-61000-4-2 Features a Globally Leading ESD Capacity of ±15-kV
2: Wide Input Power Range of 5.5V–40V, Surpassing Equivalent Industry Products and Satisfying ISO7637 Transient Drop Test Conditions
3: Bus Slope Control to Optimize the LIN Transceiver's External Radiation Levels and Excellent EMI Capabilities
4: Ultra-Low Power Sleep Mode, with Power Use as Low as 5.9 μA in Sleep Mode
5: TXD Dominant Time-Out Protection to Prevent Prolonged Bus Occupation
6: Comprehensive Protection Mechanisms, Including Under-Voltage and Over-Temperature Protection
7: The DFN Package in the TPT102xQ Series Uses the Wettable Flank Process
This enhances solder joint visibility for AOI inspection and the reliability of the solder. This process also reduces the likelihood of electrical failures or performance degradation in automotive electronics.
8: The TPT102xQ Series LIN Transceivers with ISO 17987-7 International Standard Consistency Testing Reports are Certified by Third-Party Lab IHR
IHR is one of the world's most authoritative automotive bus consistency testing and certification bodies. It is a member of the International Organization for Standardization (ISO) Work Group. IHR provides testing services for common bus standards like the LIN Consortium Standard and complete vehicle factory standards such as GMLAN.
Typical Applications for the TPT102xQ Series
The TPT102xQ Series is suitable for a wide range of automotive uses including body control, lighting, chassis control, infotainment, and ADAS. Using the TPT1021Q as an example, these typical applications are displayed below.
Typical Applications for the TPT1021Q
- +1 Like
- Add to Favorites
Recommend
- The Only Company in China Included in the IBEE ESD Report! 3PEAK‘s Complete Series of Automotive CAN Transceivers in Mass Production
- 3PEAK Becomes the First Chip Maker in China to Have Two Types of CAN Transceivers Passed German C＆S Compatibility Certification at the Same Time
- 3PEAK Honored as “Innovative Electronics Industry Enterprise“ with Six Automotive Products Included in the Catalog
- 3PEAK‘s Automotive-Grade Test Center Officially Commences Operations
- Focusing on Analog and Embedded Processors, 3PEAK Empowers High-Quality Development of the Automotive Chip Industry
- 3PEAK Provides a Complete Set of High-Performance and High-Reliability Automotive Chip Product Solutions
- 3PEAK Isolation Products Are Certified to a Full Range of Safety Standards Including VDE, TÜV, UL, CSA, CQC, and CB
- 3PEAK Achieves ISO 26262:2018 ASIL D Process Certification, the Highest Level of Automotive Functional Safety
This document is provided by Sekorm Platform for VIP exclusive service. The copyright is owned by Sekorm. Without authorization, any medias, websites or individual are not allowed to reprint. When authorizing the reprint, the link of www.sekorm.com must be indicated.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
