FIRSTOHM is Providing the Best Solution for Passing the Pulse 5a Test: Automotive Load Dump Resistor
Cost Down Solution Of ISO7637-2 / ISO16750-2 Pulse 5a/5b
In automotive systems, electronics must pass the ISO7637 EMC transient test(Pulse 5a/5b) to verify that the automotive electronics will not suffer from spikes and malfunction. In response to the surge immunity required by ISO7637 pulse 5a, a TVS function higher than pulse 5b must be selected to pass the test.
Firstohm is providing the best solution for passing the pulse 5a test. It is recommended to use an anti-surge resistor/automotive load dump resistor to reduce the impact of the surgeon the circuit, as follows:
FIRSTOHM recommends an alternative to ISO16750 for a 12V battery system
FIRSTOHM recommends an alternative to ISO16750 for a 24V battery system
Testing Result From SGS Lab
- +1 Like
- Add to Favorites
Recommend
- FIRSTOHM Offered Advanced Welded Spot Of Anti-Surge Wire Wound Resistor
- Firstohm‘s Superior Anti-Surge Wire Wound Axial Resistor SSWA Series With a low-temperature coefficient and a wide temperature range
- FIRSTOHM Long Term Stabilized Resistors For Meters
- Superior Anti-Surge Wire Wound Axial Resistors Reduced Total Bom Cost with Stable Production Lead Time
- What events did Tefoo Energy attend in the first half of 2024?
- Syrlinks, selected by Thales Alenia Space for Omnispace’s first space and ground 5G network
- ZTT Unveils “Future First“Telecom Series at MWC Shanghai 2024
- Automotive-grade TVS diode UATxP series, P600 package, used for load dump protection of vehicle power supply system
This document is provided by Sekorm Platform for VIP exclusive service. The copyright is owned by Sekorm. Without authorization, any medias, websites or individual are not allowed to reprint. When authorizing the reprint, the link of www.sekorm.com must be indicated.