Metrodyne’s MIS-3500 Series Integrated Pressure Sensor Provides 3V or 5V Rail-to-Rail Ratiometric Analog Output
The MIS-3500 is an intelligent Pressure Sensor that consists of a MEMS piezoresistive pressure sensor and a CMOS sensor interface IC. The interface IC enables easy and precise calibration of resistive bridge sensors via EEPROM. It corrects digitally offset gain and both temperature coefficients. All devices were factory calibrated and temperature compensated. Using the MIS-3500 series is easy to get rid of bothersome calibrations and temperature compensations. The MIS-3500 can provide 3V or 5V rail-to-rail ratiometric analog output.
Features
Factory-calibrated and temperature compensated
±1.3%FS accuracy（20 to 60℃）
3V or 5V rail to rail ratiometric analog output
Gauge pressure or vacuum type
Pressure range: 1, 5.8, 15, 30, 150 psi & -1000mbar
Applications
Industry control
Medical instrumentation
Pressure switch
Hospital bed
Pump control
Outline Dimensions
Specifications
Ordering Information
Transfer Function
P : pressure value
Voff : Offset voltage, the output voltage of the sensor without pressure applying
Vout : The output voltage of the sensor when pressure applied
Prange : Pressure range of sensor
Pin Configuration
Application Circuit Examples
Recommended Footprint
- +1 Like
- Add to Favorites
Recommend
- Metrodyne’s MIS-3600 Series Intelligent Pressure Sensor Designed for Low Voltage and Low Power Consumption Concerned Applications
- METRODYNE‘s MPS-3600 Series Differential Pressure Sensor with High Linearity, Low Hysteresis and Low Power Consumption
- MIS-2500 Series Integrated Pressure Sensor Provides 3V or 5V Rail to Rail Ratiometric Analog Output with ±1.3%FS Accuracy
- MIS-7300 Series Intelligent Pressure Sensor Provides SPI or I²C Digital Serial Output Interface to Communicate with Microprocessors
- NPM Pressure Molded Pressure Sensors Adopt“Backside Absolute Pressure“ Technology
- Ultra-stable Digital Output Pressure Sensor AS1318HU Series, Provides Low Noise, 24-bit Pressure Data and 24-bit Temperature Data
- TDK Announces the InvenSense ICP-10125 Waterproof SmartPressure™ Sensor Platform, Achieving the Industry’s Lowest Pressure Noise of 0.4 Pa RMS
- -100KPa to700kPa High Precision Pressure Sensor GP6A, Operates from Single Supply 5VDC with A TEB of Less Than 1.0%
This document is provided by Sekorm Platform for VIP exclusive service. The copyright is owned by Sekorm. Without authorization, any medias, websites or individual are not allowed to reprint. When authorizing the reprint, the link of www.sekorm.com must be indicated.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
