Hosiden Introduces USB Charger CBC6040 with Rotation Timer Intended for GIGA School Project
HOSIDEN has developed a USB Charger incorporating a rotation timer intended for the GIGA school project that contributes to the “GIGA School Concept”. The GIGA school project is being promoted by the Ministry of Education in Japan, aiming to organize and equip each student with a charging terminal and a high-speed communication environment.
By alternately using two power supplies in turn (charge start/charge end), effective terminal charging is available, making good use of limited indoor power capacity, and at a time set by the timer (as time setting is available for each week including holidays).
This unit is designed to be compact enough to be portable, enabling the charging of multiple items just by connecting a single mains power cable to the outlet. There is no need for a power strip or an AC adapter, so this greatly helps to save space.
This charger can be used not only in schools but in any situation that requires a facility to simultaneously charge multiple items. The USB ports are available in 4 types; 22, 20, 11, and 10 ports, according to the number of people who may use such charging terminals.
Product Name and Model Number
[Product Name]
USB charger with rotation timer
[Model Number]
Principal Features
Contributes to the GIGA School Concept promoted by the Japanese Ministry of Education.
The power supply enables simple installation using a single outlet, and the body comprises a compact enclosure.
An AC adapter or a power strip which is normally necessary for multiple charging terminals is not required, helping to make this a space-saving design layout.
Rapid charging at 2.4A output is supported.
No additional electrical wiring is required.
Features such as “Rotation setting,” “ON/OFF switching,” and “Output control at power interruption” are supported.
A variety of USB port-counts are available for power feeds: 22, 20, 11, and 10 ports available.
For the USB ports, automotive manufacturing safety standards have been used for parts and design.
Designed and produced in Japan with quality assured.
Application
USB charging via multiple terminals in GIGA participating schools, public facilities, and companies.
Main Specifications
- +1 Like
- Add to Favorites
Recommend
- Hosiden’s High-speed signal Connector Using Newly-developed Eco-friendly Materials
- Hosiden‘s Sample Development of Perovskite Solar Cells
- Hosiden‘s Customization of Bluetooth® LE Module for Use with Dustproof and Waterproof Silicone Coating
- Hosiden Expands Lineup In-Vehicle USB Chargers CBC0095, CBC0096 and CBC0097 Supporting USB-PD for Automotive
- Hosiden‘s Device Capture Capacitive Touch Panel DTS5102 is Featured with Input Devices can be Freely Mounted
- Hosiden‘s Low-cost Bluetooth® Low Energy Module HRM1092 Supporting Bluetooth®5 for Beacons,Toys,and Wireless Products
- Hosiden‘s Vibration Sensor HVE1455 for Anomaly Detection with a Wide Frequency Bandwidth up to 6000Hz
- Hosiden Signs Development Contract with Ultraleap Limited for Mid-air Haptic Technology
This document is provided by Sekorm Platform for VIP exclusive service. The copyright is owned by Sekorm. Without authorization, any medias, websites or individual are not allowed to reprint. When authorizing the reprint, the link of www.sekorm.com must be indicated.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
