Hosiden‘s Vibration Sensor HVE1455 for Anomaly Detection with a Wide Frequency Bandwidth up to 6000Hz
To reduce manpower requirements and workload, more and more facilities have been introducing IoT in recent years. Anomaly detection systems and services using edge terminals and sensors are also being introduced. A typical example of such a system is vibration monitoring of equipment to diagnose normal/abnormal operation or predict possible failure. Still, measuring and diagnosing vibration in facility equipment usually requires expensive high specification vibration measuring instruments. Often, when such measuring instrumentation is used, the greater the number of installed instruments, the better the problem detection accuracy, except that their introduction is balanced against the cost of their installation; and so in some cases, the introduction of these instruments is postponed due to poor cost-effectiveness. To solve this dilemma, HOSIDEN has developed an IoT Vibration Sensor with sufficient performance to diagnose operations and predict failures.
Product Name and Model Number
・Product Name: Vibration Sensor
・Model Number: HVE1455
Typical Features
・Wide frequency bandwidth up to 6,000Hz. Able to capture vibrations of harmonic components which conventional measurement instruments (such as portable vibration sensors or semi-conductor acceleration sensors) often overlook, including failure signs such as chipped gears or bearing wear.
・Installation is easy as the sensor can be retrofitted to the target equipment using a magnet or adhesive.
Application
・Status monitoring and detection of normal/abnormal vibration in machinery
Main Specifications
- +1 Like
- Add to Favorites
Recommend
- Hosiden’s High-speed signal Connector Using Newly-developed Eco-friendly Materials
- Hosiden‘s Sample Development of Perovskite Solar Cells
- Hosiden‘s Customization of Bluetooth® LE Module for Use with Dustproof and Waterproof Silicone Coating
- Hosiden Expands Lineup In-Vehicle USB Chargers CBC0095, CBC0096 and CBC0097 Supporting USB-PD for Automotive
- Hosiden Strengthened Sales of MIPI A-PHY-supported Automotive Connectors and Harnesses
- Hosiden‘s Device Capture Capacitive Touch Panel DTS5102 is Featured with Input Devices can be Freely Mounted
- Hosiden‘s Low-cost Bluetooth® Low Energy Module HRM1092 Supporting Bluetooth®5 for Beacons,Toys,and Wireless Products
- Hosiden Signs Development Contract with Ultraleap Limited for Mid-air Haptic Technology
This document is provided by Sekorm Platform for VIP exclusive service. The copyright is owned by Sekorm. Without authorization, any medias, websites or individual are not allowed to reprint. When authorizing the reprint, the link of www.sekorm.com must be indicated.