Transformer Characteristic Parameters
In this article PH will introduce the characteristic parameters of Transformer.
Working Frequency
The loss of transformer core is closely related to frequency, so it should be designed and used based on the frequency of use, which is called the working frequency.
Rated Power
Under the specified frequency and voltage, the transformer can operate for a long time without exceeding the output power of the specified temperature rise.
Rated Voltage
The voltage allowed to be applied on the coil of a transformer during operation shall not exceed the specified value.
Voltage Ratio
Refers to the ratio of the primary voltage to the secondary voltage of a transformer, which differs between the no-load voltage ratio and the load voltage ratio.
No-load Current
When the secondary circuit of the transformer is open, there is still a certain amount of current in the primary, which is called no-load current. The no-load current consists of magnetizing current (generating magnetic flux) and iron loss current (caused by core loss). For a 50Hz power transformer, the no-load current is basically equal to the magnetization current.
No-load Loss
Refers to the power loss measured in the primary when the secondary circuit of the transformer is open. The main loss is the iron core loss, followed by the loss (copper loss) caused by the no-load current on the copper resistance of the primary coil, which is very small.
Efficiency
The percentage of the ratio of secondary power P2 to primary power P1. Usually, the higher the rated power of a transformer, the higher its efficiency.
Insulation Resistance
Indicates the insulation performance between the coils of a transformer and between the coils and the iron core. The level of insulation resistance is related to the performance, temperature, and humidity of the insulation materials used.
- +1 Like
- Add to Favorites
Recommend
- Working Principle of Transformer
- What?! There Is A Capacitor in My Transformer?
- Premo’s 50KW Off Board Charger Transformer with Embedded LLC Resonant Choke, Delivering Power with over 99% Efficiency
- Analysis of Technical Problems of Detailed Information of Load Test of Transformer Tester
- How to Improve The Efficiency of Transformer Measuring Instrument
- Transformer tester inspection and accident handling methods
- PREMO Releases New Series BCBM-11KW-004, an 11KW LLC Set with Combined Transformer and Resonance Inductor Specifically Designed for Onboard Chargers
- The Hazards of the Short Circuit of the Transformer Tester and The Solutions
This document is provided by Sekorm Platform for VIP exclusive service. The copyright is owned by Sekorm. Without authorization, any medias, websites or individual are not allowed to reprint. When authorizing the reprint, the link of www.sekorm.com must be indicated.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
