Yint Offers a Solution Compliing with IEC61000-4-2 Air 15KV and Contact 8KV for ESD Protection of Microphones
Microphones are energy-conversion devices that convert sound signals into electrical signals. As equipment is in contact with the human body, there are ESD electrical hazards.
Standard signal maximums for microphone lines are typically 5.5Vp-p and maximum frequencies below 10kHz.
At this frequency, the capacitance of the suppressor does not need to be considered.
Fig.1
This solution complies with IEC61000-4-2 air 15KV contact 8KV.
ESD protection can use discrete multilayer varistors or diode arrays.
- +1 Like
- Add to Favorites
Recommend
- A 12V DC Lightning Protection Solution from Yint
- Yint Electronics Recommends Using a Varistor for Input Overvoltage Protection of Smart Meters
- Yint Electronics Provides Effective Circuit Protection for UWB Positioning Base Stations
- Yint Electronics MOV 14D561K, TVS SMBJ6.5CA P6SMBJ10CA for Power Line Carrier PLC Interface Circuit
- How To View The Importance Of Power Surges To The System？
- Yint Provides a LCD Module Protection Scheme Based on Discrete Multilayer Varistors
- The Rise in Copper Prices And Its Impact on Electronic Component Costs
- Yint Protection Device for LCD Module Protection Solution
This document is provided by Sekorm Platform for VIP exclusive service. The copyright is owned by Sekorm. Without authorization, any medias, websites or individual are not allowed to reprint. When authorizing the reprint, the link of www.sekorm.com must be indicated.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
