Consensic 2V~5.5V Digital Barometer CPS125 with a Average Current Consumption <5μA and the Temperature Accuracy of ±1.0℃
The CPS125 system-in-a-package (SIP) solution comprises of a resistive bridge-type pressure sensor and a 24-bit ADC for high-resolution and accurate pressure measurements. The fully calibrated pressure and temperature-compensated digital output make the CPS125 solution simple to use. The CPS125 Digital Barometer includes internal calibration logic that provides accurate pressure and temperature measurements to the application via the I²C interface. There is no need to separately download internal calibration coefficients and have the host microcontroller perform complicated compensation calculations.
Benefits
Low Power Consumption
Excellent for Battery Applications
External Clock not Required
High Resistance to Sensing Media
Features
Factory Calibrated Pressure and Temperature Sensor
Supply Voltage: 2V to 5.5V(3V@typical)
Average Current Consumption: <5μA (One Measurement)
Sleep State Current Consumption: <200nA (25℃)
Operating Temperature Range: -40℃ to +85℃
Pressure Absolute Accuracy: ±0.5kPa (±5.0mbar) @0℃ to 50℃, 95kPa to 105kPa
Pressure Relative Accuracy: ±0.05kPa
Temperature Accuracy: ±1.0℃
Interfaces
I²C (up to 400kHz)
Physical Characteristics
Small Form Factor, 3x5x1.2mm (w x l x h)
LGA Package, 8 Lead
Top Side Sensing Port
Applications
Smartphones
Wearables
Altimeters
Portable and Stationary Barometers
Weather Stations
GPS Applications
Hard Disk Drives(HDD)
Industrial Equipment
Air Control Systems
Vacuum Systems
BLOCK DIAGRAM
ABSOLUTE RATINGS
OPERATING CONDITIONS
ELECTRICAL PARAMETERS
ORDERING INFORMATION
- +1 Like
- Add to Favorites
Recommend
- Kinghelm‘s KH-GPS121204-WYCX GPS Antenna Ensures Stable Signal Reception with Its 50Ω Impedance and 1575.42MHz Frequency Range
- Kinghelm‘s KH-GPS121204-WY GPS Antenna with Versatile Applications and Remarkable Product Advantages Is Reliable for Navigation
- Slkor SL4054 Constant-current/Constant-voltage Linear Charger for Single Cell Lithium-ion Batteries
- A Single Cell Lithium-Ion Battery Charger Using a Constant-Current/Constant Voltage Algorithm-A4055
- ROHM Develops a New Op Amp that Minimizes Current Consumption, Improving Power Savings in Consumer and Industrial Equipment
- WattUp®Wireless Charging for Consumer Electronics, Ensuring Consistent Uptime
- Digging Deeper into Dielectric Constant for PCB Materials
- Digital Isolator Devices That Can Protect 24 V Digital Inputs & Outputs in Industrial Environments
This document is provided by Sekorm Platform for VIP exclusive service. The copyright is owned by Sekorm. Without authorization, any medias, websites or individual are not allowed to reprint. When authorizing the reprint, the link of www.sekorm.com must be indicated.