CPS120 Digital Barometer Data Sheet
■The CPS120 is a capacitive absolute pressure sensor solution with a fully calibrated pressure and temperature compensated digital output for low pressure applications, such as barometric sensing. Low current consumption (<1μA @ 25°C in Sleep Mode) and operating supply voltage range 2.3V to 5.5V targets battery and other low-power applications.
■The CPS120SiP (System-in-a-Package) solution comprises of an ultra-small capacitive MEMS pressure sensor and a conditioning ASIC for accurate pressure measurements. An integrated sigma-delta based ADC combined with internal calibration logic provides accurate pressure and temperature measurements to the application via the SPI or I²C interface. There is no need to separately download internal calibration coefficients and have the host microcontroller conduct complicated compensation calculations. Two selectable modes (Sleep and Update)and an external "Measurement Ready" pin ensure operational flexibility suitable for a wide range of applications.
●Benefits
■Low Power Consumption. Excellent for Battery and Other Low-Power Applications
■External Clock not Required
■High Resistance to Sensing Media
●Features
■Factory CalibratedPressure and Temperature Sensor
■Programmable Temperature and Pressure Sample Rate and Resolution (8, 10, 12 or 14bit)
■Sampling Rates as Fast as 0.7ms @ 8-bit, 1.6ms @ 10-bit, 5.0ms @ 12-bit, 18.5ms @14-bit
■Supply Voltage: 3.0V ±10%
■Absolute Temperature Range: -40°C to +85°C
■Pressure Accuracy: <±0.2kPa (<±2.0mbar) @ 25°C
■Temperature Accuracy: ±1.0°C
■Internal Logic with Two Selectable States (Sleep and Update Mode)
■Altitude Resolution Better Than 1.0meter (50cm) in Update Mode
[ Altimeters ][ Portable Barometers ][ Stationary Barometers ][ Weather Stations ][ GPS Applications ][ Hard Disk Drives ][ HDD ][ Industrial Equipment ][ Air Control Systems ][ Vacuum Systems ] |
|
Datasheet |
|
|
|
Please see the document for details |
|
|
|
|
|
LGA |
|
English Chinese Chinese and English Japanese |
|
23-OCT-2013 |
|
Rev. 4.1 |
|
DAT-0001 |
|
1.3 MB |
- +1 Like
- Add to Favorites
Recommend
- Consensic 2V~5.5V Digital Barometer CPS125 with a Average Current Consumption <5μA and the Temperature Accuracy of ±1.0℃
- Kinghelm‘s KH-GPS121204-WYCX GPS Antenna Ensures Stable Signal Reception with Its 50Ω Impedance and 1575.42MHz Frequency Range
- Kinghelm‘s KH-GPS121204-WY GPS Antenna with Versatile Applications and Remarkable Product Advantages Is Reliable for Navigation
- Slkor SL4054 Constant-current/Constant-voltage Linear Charger for Single Cell Lithium-ion Batteries
- A Single Cell Lithium-Ion Battery Charger Using a Constant-Current/Constant Voltage Algorithm-A4055
- ROHM Develops a New Op Amp that Minimizes Current Consumption, Improving Power Savings in Consumer and Industrial Equipment
- WattUp®Wireless Charging for Consumer Electronics, Ensuring Consistent Uptime
- Digging Deeper into Dielectric Constant for PCB Materials
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.